isothermal造句
61) And you know, you could have a reversible engine with lots and lots of steps, but you could always break them down into some sequence of adiabatic and isothermal steps.
62) An experimental study on non - isothermal flow resistance for Coke - Residual Oil Slurry ( POS ) in tubes was made.
63) Isothermal forging process are the best deformation process, according to anti - torque arm specifications.
64) The intrinsic kinetics of KD306 type sulfur tolerant methanation catalyst was studied in an isothermal integrated reactor and the reaction model of power functions type was established.
65) The spheroidizing grow, in isothermal spheroidizing process, of carbides formed from deformation under high temperature in, hypoeutectic white cast iron is studied.
66) The relational expression of natural convective heat transfer of isothermal vertical strip was found.
67) The high - pressure metamorphic rocks underwent an isothermal decompressional retrograde process after the peak metamorphism.
68) A new ICE working cycle with a partial isothermal compression stroke is advanced.
69) Cordillera type has a close relationship with high-temperature metamorphism and accompanied the emplacement of granitoid, giving rise to isothermal decompression and then isobaric cooling pT-t paths.
70) The stability of the vitamine B_(12) injection was studied by accelerated stability test with the classical isothermal method.
71) This paper discusses the finite time availability of ideal gas system in constant volume process, constant pressure process, isothermal process and adiabatic process.
72) The concentration distribution of pulverized coal in blowpipe of blast furnace was measured in an isothermal two-phase model by means of a computer measuring system based on infrared transmission.
73) The article from practice, it introduced the study on isothermal extrusion using the deform.
74) Therefore, it is of great significance to research the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex aviatic forge pieces.
75) We also find that under isothermal boundary condition, due to heat can be distributed in time, the internal thermal resistance and heat distribution leading role on the module temperature rises.
76) The effect of forged isothermal hardening of high carbon low steel ball were studied.
77) For the facility of the calculation, the isothermal section of the 1873K was been made as numeralization.
78) Under the calefactive and isothermal conditions, the seepage flux increased nonlinearly as the pore pressure increased.
79) When the isothermal time is long enough, the carbide precipitated between the rod-like upper bainite, so the upper bainite presented normal featherlike micromorphology.
80) The microstructure and property of alloy carburizing steel forged parts after general normalizing and isothermal normalizing were studied.
81) The coking and deactivation of virgin naphtha aromatization catalyst are studied on isothermal reactor.
82) The study is focused on isothermal precision forming technology of rib - web forging parts.
83) It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings.
84) It has been found that the coercive force is very sensitive to the temperature of isothermal magnetic treatment.
85) Advantageous in high activity, good selectivity and long operation cycle, the C_2 hydrogenation isothermal reactor ER-424A/B has a unique hydrogenation effect.
86) The improvement of the conventional isothermal annealing was also explored in this article.
87) Similarly, it is composed of the two isothermal and two isobaric processes.
88) Increasing the semisolid isothermal heat treatment temperature can promote solute diffusion and quicken grain spheroidization speed.
89) Under isothermal condition, the results show that the pyrolysis of MSW nearly all is occurred on one time range, but it's initiative time and terminal time is not same.
90) Results show that isothermal and dynamic rheological behavior of resin fit in Arrhenius rheology model very well, and the model results and the experimental results are in good agreement.
1234