modulus造句
91 The tensile strength, modulus of elasticity(MOE) and hardness of Pinus massoniana fibers were determined by using zero-span tension and nanoindentation technique.
92 Brightness factor F is keywords , the simultaneous inner minor wave modulus carries out a descending sort on all son , the F minor wave modulus choosing front implants location as figure watermark.
93 Applying classical wave theory, a concept of equivalent elastic modulus on propagation speed modification of guided wave through"variable cross-section"of metal bar embeded layer was put forward.
94 The function between the modify modulus and the specific speed can be found by regression analysis. And the result of the modification can be validated.
95 The crystal structure, lattice constant, bulk modulus and band structures obtained by our calculation are in good agreement with other theoretical results and experimental data.
96 However, the relationship among longitudinal wave velocity, Young's modulus and peak stress presented different variation according to the type of rock.
97 The general intelligent controller for building automation system (BAS) is composed of AT89S52 and RS232 interfaces, modulus conversion chip, dynatron and NE4100 gateway etc.
98 The attenuation peak and the imaginary modulus peak shift to higher temperatures when the frequency increases which are thermal relaxation phenomena.
99 In the testing of the flexile modulus of PVC-U profiles, the load-deflection trace varied with the shapes of the samples, an inflection appeared when using irregular samples.
100 In addition, the experimental relationships of the characteristic length, strain modulus and density, content of the unfrozen solution were given.
101 The numerical application is performed for robust static divergence and aeroelastic deformation of a large aspect-ratio wing with perturbation on the elastic modulus of its fore-beam.
102 A low modulus high performance thermoplastic elastomer with food compliance specificity.
103 The dynamic modulus of elasticity is closer to the static modulus of elasticity of the fiberboard which ratio of density or length and cross- section area ratio is bigger.
104 The general analytic formulas for a new miniature matched load are discussed in this paper. The quasi-periodical property of reflected coefficient modulus with frequency is investigated.
105 The weight loss and liquid phase absorbability of low modulus PAN carbon fibre and viscose carbon fibre after surface modified by the phosphide steam method were studied.
106 Regarding the time-variable channel which needs adaptive equalization, the Constant Modulus Algorithm is analyzed and improved.
107 A low modulus high performance thermoplastic elastomer with compliance specificity.
108 Because the soil and water conservation factor was not concluded in net method, the soil erosion modulus calculated with net method was higher than that calculated with sampling survey method.
109 With the increase of initial deviator stress, the dynamic elastic modulus increases greatly under the same level of dynamic strain.
110 The stress - relaxation modulus is a continuous, decreasing function.
111 If Young's modulus is very low, the material is more elastic.
112 A medium modulus polyester alloy suited for injection molding of Air Bag Deployment Doors.
113 Oh, this is by, yeah, the square root-- And so the higher Young's modulus is, the higher the speed of sound is, and that is intuitively sort of pleasing.
114 Furthermore, the relation of fabric drapability and stretching-length, flexual modulus and shearing modulus is also discussed.
115 Cell-size has a significant effect not only on the crushing stress and plastic modulus of aluminum foam, but also on the strain-rate sensitivity of material of this kind.
116 The prepare method of high modulus resin matrix was introduced, of which epoxy resin TDE-85 was used as matrix, A 50 and MPD were used as curing agents.
117 The larger the elastic modulus, the greater the stress needed for a given strain.
118 Tangent modulus of elasticity and volume modulus of deformation increase with the reduction of water content and rapidly reduce with the increase of strain.
119 Profile with bigger section modulus of bending will be more difficult to bend, and the bigger the distance from neutral surface to the axis of the roller, the smaller the curvature radius.
120 The results indicate that elastic modulus, the angle of internal friction, and cohesive stress of the backfill are main factors affecting the stability of the slope.
12345