rpm造句
(1) Both engines were running at 2500 rpm.
(2) The approach from ICT images to RPM is presented.
(3) IS THE OUTPUT SPEED SENSOR RPM EQUAL TO ZERO?
(4) Ignition timing must advance as rpm increases.
(5) Redline of this engine is at 4200 RPM.
(6) They develop 4.5 horse - power at 9,000 rpm.
(7) How to install or updata RPM package?
(8) The AOI Signal Converter measures rotary table RPM and pump SPM without the use of a generator.
(9) I bought some old 78 rpm records at a flea market in the village hall.
(10) For example, a 15,000 RPM drive has an average seek time of approximately 3.5 milliseconds for reads and 4 milliseconds for writes.
(11) AIM: To observe the mechanism that rapamycin (RPM) affects HMGB1 expression and release in RAW264.7 cells induced by lipopolysaccharides (LPS).
(12) RPM Main grade for milling of steel and long - chipping iron materials.
(13) I bought some old 78 - rpm records at flea market in the village hall.
(14) Building an RPM without the privileges of root prevents changes to core system files.
(15) The tach display board has the numeric and bargraph readouts for the engine rpm , as well as the bargraph levels of the fuel, oil, voltage and water.
(16) The torque increases to incredible 860 Nm at 2000 rpm.
(17) The AIR BENDER first achieves the right among of RPM, which give you the proper amount of actual lift generated above the aircraft, the aircraft is fully flight ready!
(18) The TG 70 steam turbine has a operation speed of 9600 rotations per minute ( RPM ) .
(19) ARE BOTH INPUT AND OUTPUT SPEED READINGS GREATER THAN 0 RPM?
(20) In addition, open source alternatives such as apt (Advanced Packaging Tool) for Debian or yum (Yellow dog updater, modified) for RPM Package Manager-based distributions are available.
(21) It is an interactive, automated update program that can be used for maintaining systems using RPM.
(22) In a few seconds the gyro will run up to 4,000 rpm.
(23) The zener diode coordinate translator and its designing principle are expounded by taking the metering of RPM of 4125A engine for example.
(24) With the Manual Flow Control (MFC) pump capacity can be changed from maximum to zero without altering the discharge pressure, without by-passing fluid, and without changing pump RPM.
(25) With normal ceramic or AlNiCo magnets, one would have to go to much greater lengths to build a alternator which efficiently produces this kind power at such low rpm.
(26) For instance, a 900 mm diameter, 600 mm wide Banki turbine running from a head of 20 metres at one cubic metre per second will produce in excess of 260 shaft horsepower at about 500 RPM.
(27) Maintenance - free CDI ignition system ensures precise, reliable spark for peak engine performance at all RPM.
(28) Fully new water pump, more powerful. Adopt a forward inclined impeller on the water pump to enhance water delivery capacity at low rpm and to enhance engine heat dissipation.
(29) During warm up, the most important input, besides engine load and rpm for basic pulse time, is engine temperature.
(30) The zener diode coordinate translator and its designing principle are expounded by taking the metering of RPM of 4125A engine...
12