flywheel造句61. It is no problem to keep a ceramic flywheel appropriately magnetised.
62. Remove the flywheel or converter drive platDiscard the old bolts.
63. The result showed that control was easy and dynamic propriety was good. This magnetic bearing had widely application in flywheel energy storage system, super high speed motor, and so on.
64. Custom computer power equipment manufacturing services, Uninterruptible power supply systems, Flywheel energy storage equipment, Fuel cell energy conversion equipment, Power electronics devices.
65. As the flywheel speeds up and slows down, so does the frequency with which the magnetised spot passes the sensor.
66. Improvement is made to the positioning feller gauge in flywheel keyway broaching machine by V-type auto center align.
67. For a cracked flywheel shell in automobile, the real weak vibration signal identification is achieved.
68. It is to make the engine flywheel hole taper as clutch active.
69. Facing on flywheel side of disc torn, gouged, or worn.
70. Flywheel is an important executive component of satellite attitude control system.
71. The energy conversion unit of the flywheel energy storage system is described in this paper.
72. Allow the ring gear to cool down before installation on the enginPlace flywheel on work bench and let it cool in normal shop air.
73. The amount of energy that a flywheel will store for a given change in speed depends on its inertia, which, in turn, depends on its mass and its effective diameter.
74. To bias momentum flywheel system, based on classic control theory,[http:///flywheel.html] a PID control law for pitching and non-least phase control law for rolling-yawing are developed.
75. The flywheel provides a mounting location for the clutch assembly as well.
76. The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.
77. The brushless direct current motor used in magnetic suspending flywheel features a structure of large air and small ratio of length to diameter.
78. Finally, clutch can be detached from the flywheel and removed. Refer to the shop manual.