cathode造句
61. Molten-salt electrolytic preparation of deteriorative agent AlSr alloy by using liquid A1 as cathode is characterized by such advantages as simple process, low cost and high product purity.
62. BD additive used in this technology can widen the polarization of the cathode, expand the range of the current density in the black area, improve the ability of the deep plating and even plating.
63. The SEI film formed on cathode surface and the interaction between electrodes based on aqueous binding materials and electrolyte solution would be the hotspot in the fut...
64. Experiment results indicated that rare earth could improve the hardness of bright nickel plating, the cathode polarization ability, the substrate bond strength and the grinding ratios of diamond tool.
65. Silver vanadium oxide (SVO) cathode material has been widely used in implantable cardiac defibrillator (ICD) power system, and is a cathode material of high value in research and development.
66. A kind of new method of electrochemical deposited calcium phosphate bioceramic coating -electro- deposition bioceramic coating by cathode revolving is introduced.
67. Electrolytic reduction of o-nitrophenol to aminophenol at a copper cathode was conducted inalkaline solution.
68. The results show that the ferrate can be used as cathode material in non-aqueous system to make lithium-ferrate primary cell.
69. From the experiment result of metal specimens buried in underground,[www.] discussing the influence of AC stray current on cathode protection by using galvanic anode method.
70. A novel technique has been developed to dynamically measure the cathode evaporation with a quartz oscillator.
71. Comparing with the conventional cold glow discharge, the hot cathode glow discharge is a new type of gas discharge.
72. The end point of titration of boron by CPC is indicated by the sudden movement of a fluorescent spot on the screen of the cathode ray oscillograph.
73. CAW were firstly reported applied as a cathode of the lithium - ion secondary batteries in the dissertation.
74. The relation between characteristics of hot cathode glow discharge and diamond film deposition techniques in hot cathode glow discharge plasma chemical vapor deposition process was discussed.
75. The effects of cathode current density, mass concentration of suspended W powders, temperature, stirring intensity on the volume fraction of W particles in the Cu-W composite coating were studied.
76. A flat fluorescent display device consists of multiple disintegrated display units, all the parts of the cathode of which are in working state.
77. In this paper, a physical model about the effect of composition demixing between alloy coatings and alloy cathode material in multi arc ion plating is proposed.
78. The electrochemical synthesis of anthracene magnesium by using sacrificial magnesium anode and'carbon cathode was studied.
79. The so - called visual display unit is in fact a cathode ray tube.
80. The cathode bias potential mainly affects the crystallinity of the films.
81. Thomson focused on traditional cathode ray TVs, rather than the flat - panel models now enjoying strong demand.
82. The ferroelectric material is a novel cathode material, which is characterized by its low vacuum requirement, convenient fabrication, low work function and fast reactive rate.
83. Old theory of virtual cathode oscillator has been summarized and supplemented in detail.
84. The functions of the hollow cathode for electron bombardment mercury ion thruster and its requirements are described.
85. Current controlling: analog voltage output of D/A with computer digital signal to control cathode filament voltage of X-Ray generator.
86. The photocathode consists of a substrate (involving a conductive base film for dielectric cathode) and a photoemission film.
87. An alkaline electrochemical cell having an anode containing zinc and a cathode that includes a catalyst and an iodate is disclosed.
88. Hollow cathode is a key assemble of ion engine. So it is import ant to study its failure mode for improve the reliability of ion thruster.
89. The cathode rays are always beamed on a fresh area of the anode surface.
90. AlN films were prepared on hi alloy substrates by cathode sputtering, and the effect of gas pressure on crystal orientation and residual stress in AlN films was investigated by X-ray diffraction.
123456789