quenching造句
91. According to feature of 6A02 aluminum alloy and quality requirement of the shapes, spray quenching and forced air quenching on the shapes flowing bed of extruder were conducted.
92. Thebeverage has many functions such as promoting the secretion of saliva and quenching thirst, whetting appetite, promoting the development of children, resisting apolexis andanticanceration.
93. Very average wines capable of quenching thirst but little else. Straightforward and unremarkable.
94. The processing technique of centrifugal grainy equipment and water quenching method for molten steel slag was studied in this paper.
95. The performance and applying effect of the gelled material from the water quenching slag for backfilling are described.
96. The oxidation of boronized knives during heat treatment depends chiefly upon the oxidizing power of the quenching medium, this problem has been solved by using the water quenching oil cooling process.
97. If some coolant is injected from top to increase the total flooding rate, the quenching time gets shorter at all elevations.
98. For high-frequency quenching, need the data of recording the monitor data and clear WI.
99. The effect of SST103 quenching medium on hardness distribution and cracking character of low chromium semi-steel were studied.
100. The utility model relates to a plate spring vertical quenching device controlled by a computer, which is suitable for the plate spring quenching of various vehicles.
101. The distribution of the temperature field during magnetic field quenching is a kind of new research.
102. Effects of sample volume, type of the counting vial, solvent and turbidity quenching on the Cerenkov counting efficiency are observed.
103. Adopting the cooling way of water quenching oil to perform the heat treatment quenching, to make the mechanical property of forgings meet the technical requirements.
104. The results showed that after the deformation of unrecrystallized austenite and quenching, martensite block width decreased and bent, while the packet size increased to some extent.
105. The results show that quenching way has the most obvious effect on the mechanical properties of the alloys. Water quenching can improve the mechanical properties of the alloys more.
106. Crack arrest was executed around the quenching crack tip inside the metal die of T10 steel through pulse current discharge with the new super-density pulse current generator model ZL-2 self designed.
107. Experimental results showed that the service life of die can be improved evidently by using high temperature quenching and stress relief annealing.
108. In this work, the photoreduction and the triplet quenching of ketocoumarin derivatives have been studied by laser flash photolysis method.
109. Hyperglycemia has been shown to potentiate ischemic injury of the spinal cord by quenching vasodilators and potentiating tissue acidosis and free radical production.
110. Precisely measuring and tracing is a precondition and basis of arc-suppression coil with automatic tuning accurately compensating system capacitive current and efficiently quenching ground arc.
111. And have soft water cooling system, the upright hydraulic pressure quenching machine tool assort that.
112. On the premise that the tensile strength and the end quenching hardness don ′t decrease too much, the impact value can be greatly increased by increasing chromium content in composition range.
113. Four kinds of dual-phase steel with different morphology were developed by means of step quenching treatment routes.
114. Two special processes using interrupted quenching are a form of tempering.
115. For studying spray-quenching process of large-scale forgings, spray-quenching equipment was developed, and experiments of spray quenching on shaft type parts were carried out.
116. The surface induction quenching test on gray iron and spheroidal graphite cast iron indicated that the equipment was easy to operate, and had strong stability, it was provided with practicality value.
117. Quenching crack propagation characteristics of the organizations on both sides without decarburization phenomenon significant difference between crack and materials and forging cracks.
118. A cybernetic model system scheme on interaction of arc and circuit is introduced and its functions in the field of studying the bum-ning and quenching processes of arc are discussed in this paper.
119. As quenching liquid, stir frying with vinegar is better than brine under the experiment condition.
120. However, brine or water quenching is capable of rapidly bringing the surface of the quenched part to its own temperature and maintaining it at or close to this temperature.
123456