waterborne造句31. Polyamine - epoxy adduct is used as waterborne epoxy hardener generally.
32. They are at risk of getting ill and dying from waterborne diseases.
33. The impact of waterborne zinc on the content of metallothionein in different tissues of Carassius auratus in experimental condition was investigated.
34. Do not clean the waterborne lacquer of spray gun with the oily lacquer cleaner.
35. F500 series of waterborne fluorocarbon resins are prepared by emulsion polymerization with chlorotrifluoroethylene and non-fluoro alkene as raw materials.
35.try its best to collect and build good sentences.
36. A novel hyperbranched waterborne polyurethane was prepared based on the monomers of isophorone diisocyanate(IPDI), dimethylolpropionic acid (DMPA), diethanolamine (DEA) and the core of melamine.
37. Recent research and development trend of resins for waterborne coatings are discussed.
38. Waterborne transmission has been reported, both from contaminated drinking-water and from recreational waters.
39. These waterborne and other environmentally - friendly technologies comprise acrylics, urethanes, urethane - acrylics , vinyl acrylics and other copolymers.
40. Therefore it becomes a tendency to develop nonionic type waterborne epoxy curing agent.
41. Content of isocyanate group in waterborne polyurethane prepolymer is tested as solvent , n - dibutylamine as reactionas thinner.
42. At present, alkyd, epoxy resin, polyurethane resin, acrylate and varieties of their modified resins are better domestic resins for waterborne coatings.
43. Also described in the article are HT waterborne heat resistant coatings and WP waterborne micaceous iron oxide coatings.
44. A waterborne multicolor paint is prepared by chitosan in acetic acid solution, mixing with short fiber and crosslinked by glutaric dialdehyde.
45. Waterborne alkyd resin modified by tung oil was prepared by molten fatty acid method from tung oil, maleic anhydride, phthalic anhydride, adipic acid, lauric acid, trimethylolpropane.
46. Waterborne acrylic pressure - sensitive adhesives ( PSAs ) with low peel strength were prepared by the semi - continuous emulsion polymerization.
47. The influential factors including waterborne anti-rust resins, acrylic emulsion and thixotropic agents, etc are also discussed.
48. The paper introduces the development of an air-dried waterborne acrylate modified alkyd paint, discusses the effects of drier, neutralizer, cosolvent and etc.
49. The preparation method and technics of waterborne polyurethane are optimized.
50. Before clear generation, traffic main body is wadi, waterborne it is carriage important channel.
51. A high decorative and high performance nano hybrid waterborne curtain wall-like exterior wall coatings is developed.
52. Effective preservatives. Use in waterborne or formaldehyde sensitive system. Non-solvent and formaldehyde free. Prevent the products from decompounding by microorganism.
53. By intercalating chain extender, the self emulsifying anionic waterborne polyurethane emulsions which have the block structure have been prepared.
54. The formulation, production process and technical specification of the primer and surfacer primer of waterborne anti- rust emulsion paint are introduced.
55. In this paper, stable polyester anionic waterborne polyurethane emulsion was prepared with JW2503, TDI and DMPA by acetone process.
56. The preparation of waterborne acrylate hydrosol, which is stable in acidic or alkaline environments, is introduced.
57. A two-component waterborne polyurethane(2K-WPU) was prepared by mixing water soluble acrylic resin and HDI biuret, and then diluting it to phase inversion with water.
58. The mechanism and factors of Salt - water resistant of waterborne anti-rust coating are discussed in this article.
59. The application of additives in waterborne automotive base coats were introduced.
60. Mature male Gambusia affinis vitellogenin was induced by E 2 through exposure to the waterborne.