voltage drop造句
31. Refers to the electrical generator rated voltage at rated operation conditions, the terminal voltage after the rectifier and the deduction of the DC link output voltage drop.
32. The on-site test results indicate that energy meter's neutral point virtual connection has a great effect on PT secondary voltage drop.
33. The PT secondary loop voltage drop equals to the product of the PT secondary loop impedance and the loop current.
34. This article describes the design principle of the device and its parts, analyses the safe current-carrying capacity, voltage drop, sliding contact and are extinction performances of the device.
35. It has been proved that the value of the voltage drop can be achieved through the extrapolation of the forward current voltage curve when the current through the Schottky barrier diode reach 40A.
36. In the experiments , the relationships between impedance and time , voltage drop and time , were obtained.
37. Since voltage drop is prevented, voltage required for obtaining a necessary charge can be lowered./voltage drop.html
38. The PT secondary loop voltage drop is a changing amount and has the characteristics of indirection and certain randomness.
39. It's just that a buried zener is even better, if you can afford the higher voltage drop .
40. Forward Voltage Drop Power Loss, High Efficiency, High Surge Current Capability.
41. This paper analyses the blocking voltage, forward voltage drop, photoresist mask design and gate-triggering and dynamic characteristics of high-power thyristors.
42. Because of the low test current level used, a very sensitive voltmeter is required to measure the voltage drop, which is usually in the microvolt range.
43. This reduction is caused by the internal resistance (RM), which creates an additional voltage drop called the voltage burden (VB).
44. The system includes a Model 6220 Current Source to supply the current through the sample and a Model 2182A Nanovoltmeter to measure the resulting voltage drop.
45. The mechanism of harmonic increments caused by power device forward voltage drop and DC-link capacity voltage variety are analyzed in detail, and the compensation algorithm are proposed.
46. When the test current is applied, the instrument will indicate the resulting voltage drop.
47. Application of PC based instrument for ground impedance measurement can overcome the shortcomings in traditional voltage drop measurements.
48. Thermal losses are significant due to the minimum SCR on state voltage drop.
49. A new method for testing the load current and realizing the current limited control through testing the saturable voltage drop of MOSFET is introduced.
12