binder造句
(121) The organic binder extraction of injection moulded body is key step in this fabricating technology.
(122) Introduced were the research, pilot plant operation and gasifying test of briquettes made of low cost coke breeze with composite binder as a lump coke alternative to the gasifier.
(123) The influence of different kinds of binder wi th different composite ratio on electrical and storage performances of LR6batt eries are described.
(124) Application: Be used for shielding and binder of conductor and core of Power Cable.
(125) The epoxy modified organosilicane heat-resistant coatings is prepared with emery and titanium white as pigment and filler, with epoxy modified organosilicane resin as binder.
(126) The performance of fire-retardant coating can be affected by Many factors , using resin matrix as binder is one of them.
(127) Crosslinkable aromatic resin having protonic acid group, and ion conductive polymer membrane, binder and fuel cell using the resin.
(128) Thus the inner structure of the wheel is resin-metal combining binder, the surface is resin binder w...
(129) The MH electrode with the 2%PVA and 15%PTFE as the binder has discharge capacity under high rate discharge.
(130) Metal injection molding is a new net shape technology applied to produce complex-shaped metal parts, in which materials are metal powder and binder.
(131) The force-measuring ratchet wheel type binder has the advantages of high safety performance, compact structure, low manufacturing cost and the like.
(132) Forsterite-vermiculite composite material was prepared from forsterite, expanded vermiculite as raw materials and phosphate as binder at room temperature.
(133) A transparent dilatant fire retardant coatings has been developed based on a modified urea-formaldehyde resin as binder, and phosphoric acid and starch as fire retardant.
(134) Briquette binder is a key technology in the area of briquette production.
(135) Epoxy Asphalt binder is an important part of Epoxy Asphalt pavement for steel bridge deck.
(136) The AZS complex binder, being applied in the unshaped refractory, showed good performance and satisfactory effect.
(137) Prolongation of the lay-by time of HAA/T-12 and raising the curing temperature will achieve the same results in shortening the pot-life of the binder curing reaction.
(138) One trip for their Jack Russell terrier in a plane's cargo hold was enough to convince Alysa Binder and Dan Wiesel that owners needed a better option to get their pets from one city to another.
(139) The paper reports the results of PPS- 2 dry film with MoS2 as the lubricant and polyphenylene sulfide as the binder.
(140) A dilative inorganic fire proofing coatings based on water glass as binder has been prepared, which contains Aluminun hydroxide, Kaoline and Sodium Borate.
(141) The result of leaching examination showed that organic binder was better in favor of delaying nutrient release than inorganic binder.
(142) Blum opened the box with a razor blade, and out slid a two-inch-thick binder containing photos and descriptions of about 225 ornaments the museum was considering for auction.
(143) In this paper, different morphological structures which vary with the contents of furfuryl alcohol in a new zero-nitrogen no-bake furan resin foundry sand binder are systematically studied by TEM.
(144) Alumina ceramic was formed after gelling and solidify using boehmite as a binder.
(145) The experimental results show that the coating has higher strength contained PVA organic binder than con- tained colloidal silica inorganic binder at room temperature.
(146) The results show that the monolith with higher surface area and better mechanical properties could be prepared by molding the mixture of powdered activated carbon and the organic binder.
(147) Rock wool insulating tubes is basalt and other natural ore, etc as main raw materials, by high temperature melting in a fiber, stir-in binder, curing processing and is made.
(148) The feedstock injected into a mold is the mixture of metallic powder and plastic binder.
(149) The bottom layer was paper and the top layer was the emulsion or binder and on the paper with two layers it might be collodion , egg-albumen or gelatine.
(150) Practice results indicated that the content of formaldehyde in resin binder can be controlled less than1.8%and the mechanical properties completely satisfied the requirement of production.
123456