curing造句
181. The flow production lines of the curing agent part and the resin part are identical, and the difference lies in that the requirement of the curing agent on the heat is not essential.
182. The curing mechanism of bisphenol-A diglycidyl ether type epoxy resin (DGEBA) cured with Imidazole ( IMI ) was studied by DSC, FT-IR.
183. Massage on the related points gives very good effect for curing hemicrania , blood vein nervous headache, cold headache, and unreasoning headache, or heaviness in the head.
184. Prolongation of the lay-by time of HAA/T-12 and raising the curing temperature will achieve the same results in shortening the pot-life of the binder curing reaction.
185. Dycosacryl UV and UV free radicals, compared to less shrinkage, and curing speed or slower.
186. The results showed that Avian antiscolic is ideal drug for curing digest tract parasitosis of domestic pigeon caused by ascaris and capillaria.
187. It proved better synergistic action of drug combination of FOM-Ca and Cefotaxime curing chicken colibacillosis.
188. In addition to air curing, we use flue curing and fire curing. artificial heat can be used in each method.
189. The formulation and production process of this coatings were given, and factors influencing the film properties, such as level of urea-formaldehyde resin and acid curing catalyst were discussed.
190. Objective : To investigate the operating and nursing methods in curing condyloma acuminatum ( CA ) with liquid nitrogen.
191. Tensile stress was applied to the fiber prepreg to modify the residual stresses in ARALL during curing.
192. Addition of microgel can increase the solid content of coatings, improve the rheology property of coating, speed up the curing, and improve the applicati...
193. Changes in proteins of Semimembranosus and Biceps muscles mainly happened during curing and fermentation.
194. Objective To explore the effects of insulin in preventing and curing stomach esophagus stomal fistula.
195. Objective To definitude the epidemiology characteristic of the dermatitis caused by the paederus fuscipes curtis, and to provide evidences for the work of preventing and curing aftertime.
196. Rock wool insulating tubes is basalt and other natural ore, etc as main raw materials, by high temperature melting in a fiber, stir-in binder, curing processing and is made.
197. Objective To explore the highlight and flow-sheet of peri-operation care in curing childrens chronic sinusitis by endoscopic surgery.
198. Effect of curing temperature, curing time, resistance to media, kind and volume of the sand-laden fluid, and particle size of proppant on fibre compound sand control system were discussed.
199. It is found that T-M is storable and thermostable, and has slow and low liberation of heat in the curing process.
200. In addition, the change of chemical components of tobacco leaves during the loose-leaf bulk curing was the same with the hang-pole curing.
201. The prepare method of high modulus resin matrix was introduced, of which epoxy resin TDE-85 was used as matrix, A 50 and MPD were used as curing agents.
202. Curing transfer products needed to a standard of thermosetting oven or Flash dryers.
203. Reaction behavior of the acrylic and the cyclic double bond of dicyclopentadienyl acrylate(DCPA) during and after UV curing were investigated by Fourier-Transform-infrared ray(FT-IR).
204. Especially on slow curing speed and unideal glue bond properties UF resin with low molar ratio, it can solved by synthesis technology, modifier and different curing system.
205. The curing speed of PUF was faster than PF under the same hot-pressing condition.
206. UV curing inks offer many advantages in quick drying, non-clogging, even - flowing and non - odour. They are satisfied the requirements of modernized technology of screen printing.
207. Islet transplantation is an effective method for curing type 1 diabetes mellitus.
208. Objective:To investigate how to carry out radiofrequency ablation safely and efficiently in curing tachyarrhythmia by primary hospitals so that more patients can benefit from this treatment.
209. Emphasis will be primarily on reactive, moisture curing polyurethanes that are applied as one-component liquids, hot melts and binders for wood composition board.
210. The experimental results show that the deeper layer's curing speed of the ink system mainly depend on the type and the amount of the sensitizer and the hydrogen donor.
123456789