ingot造句
31. The octahedron steel ingot and V - anvil forging bar can effectively prevent cracks in crystal boundary.
32. Increasing the utilization ratio of the ingot is an important way to reduce the forging cost.
33. The rack of aluminum ingot stacker plays an important part in the process of Stacker.
34. The reason of 7475 alloy flat ingot crackle and loose combination are analysed.
35. She just stood there with an ingot in her hand -- it felt hard, cold and heavy.
36. The article elaborated our country aluminous ingot to produce the account of can rapid expansion.
37. The casting process of an aluminum ingot mold, with simple structure and high quality requirements, was introduced; it is a casting export to the United States.
38. Thus a high quality ingot with good surface finis. is. produced.
39. The quality and service performance of large cold roll produced by electroslag remelting(ESR) ingot can be obviously improved.
40. A new method to simulate directly and predict the formation process of shrinkage cavity,[http://] its final shape and position for steel castings and ingot was proposed using computer.
41. The technological parameters determine the metal pool profile and the grain size and orientation in the electroslag remelting process, and thus affect the the quality of the final ingot.
42. Putting some TiO2 into aluminum electrolyzer can make aluminum ingot produced by electrolysis containing low content titanium.
43. To be developed supply mainly includes chemical raw material, commodity, aluminum ingot and paper pulp from HuNan to SiChuan, and subsidiary agricultural products.
44. Jiaozi is oblate, similar in design to a shoe - shaped gold or silver ingot in ancient times.
45. As a result, it is possible to get a better discharge flow in the feeding zone of the ingot mold where the discharge device of molten steel is placed, in addition to less turbulence.
46. Such ingot mold, however, is able to produce slabs with a thickness that still requires considerably large machinery for the production line.
47. This paper analyzes the process and characteristics of making clip, describes the making process rules of the aluminum ingot packing clip,blemish existed and the solutions.
48. The factors that affect the porosity in transversally cast ingot are related, porosity is very detrimental to the mechanical properties and surface quality of sheet.
49. Above results will be helpful to improve the aluminum ingot machine.
50. From quality of melting metal, casting condition and casting equipment, the influence factors of crack in aluminium and its alloy slab ingot were analyzed, some suggestion have been drawn out.
51. In order to improve the liquation of MC5 cold roll blank and the strip quality, the high temperature diffusion annealing of the ingot.
52. The three dimensional flow of metals during rolling of ingot with liquid core has been studied in the article. Here the influence of liquid core ratio on rolling was studied in particular.
53. This paper expounds the causes of the rapid extension of the production capacity of aluminum ingot in China.
54. So press ingot does the outlet after where after all?
55. Macro-segregation of a steel ingot in a rectangular mold with a riser was simulated and the calculation result was compared with that of an experiment.
56. The positive segregation in the upper center and the negative segregation in the exterior region of the ingot are found at the same time.
57. The steel ingot mold made of vanadium titanium vermicular graphitic cast iron has the best comprehensive property.
58. Objective : To make the dowel nucleus fusion model with self - cured acrylic resin ingot.
59. The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.
60. Thus, it is necessary to achieve an ingot mold to cast slabs to overcome the foregoing drawbacks.
1234