ti造句121. Mo Ti also drew his inspiration from the past, but despised the ceremony - loving Confucianites.
122. The epitaxial growth is not found between(Ti, Al)N coating and substrate.
123. The extended ray tracing method can be applied to further researches on depth migration and seismic tomography for TI media.
124. The surface of diamond was plated with Cr, Ti, or Cr - Ti alloy by vacuum evaporation.
125. The enhanced SPI TMS320F2812, the newest fixed point 32bit DSP of TI, features few hardware requirement, high speed operation, flexible in configuration and continuous performance.
126. Under the conditions of nitrogen-oil mixture, cooled nitrogen and cooled nitrogen-oil mixture, the milling force experiments on high speed milling of Ti alloy TC4 were contrastingly done.
127. An annual eisteddfod or Welsh music festival still attracts Welsh singers and musicians from all around the world and one teashop is called Ti Gwyn.
128. OM 、 SEM 、 EDS 、 MEF 3 were used to analyse microstructure and grain refining of Al - Ti - C master alloys.
129. By improved the process of controlled cooling after rolling and based on experiment, a excellent wire was developed which contain the micro elements of V and Ti.
130. This kind of emulsive liquid membrane has a higher migration over Sc(III), no migration over Fe(III), and less migration over Ti(III).
131. Copying is also suggested as aby which parents ca 11 have tI 1 c child of their dreams.
132. Effect of Microstructures on Mechanical Properties for Ti - Al - Nb Ternary Alloys.
133. Through calculation and simulation , tooth contact analysis is carefully carried out for double - enveloping TI worm gearing.
134. We designed one system using high capability price ratio DSP chip of TMS 320 VC 5402 of TI Corporation.
135. The software is easy ti install like a charm in my computer.
136. TI 52 PRO LINE folding machine control system with DCT 500 ddrmidigital , reduces setup time and increases productivity.
137. Conclusion:The "new trachea"consisting of a pedicled platysma mycoutaneous flap with Ni Ti alloy mesh stent is a suitable implant for cervical tracheal replacement.
138. It is suitable for semi-finishing of casting iron, nonferrous metal, heat-resistance alloy and Ti alloy.
139. Ti - O film was prepared by microwave - electron convolute resonance ( MW - ECR ) magnetron filter arc deposition process.
140. "From a semiconductor and power-management point of view, wireless charging is a natural extension of what we have been doing, " says Masoud Beheshti, director of battery-charge management at TI.
141. Mo Ti championed the cause of the peasants and puritanically stressed the virtues of hard work.
142. Electron Microscope Analysis of Mechanically Alloyed Fe C Ti System powder.
143. The study on dealkalization and distilling Ti and Sc from red mud was made.
144. The ESR process for 0 Cr 18 Ni 10 Ti steel has been described in this article.
145. In experimental study, Ti powder was chosen for spraying onto eroded diamond segments made by hot-pressing sintering, fracture on which was made for microscope investigation.
146. The Influences of Ti content on austenite gain size and grain coarsening temperature in medium-carbon boron steel have been investigated.
147. TI introduces the silicon - based transistor which soon eclipsed germanium devices in production volume.
148. Many kinds of well-crystallized nanometer or submicron Ti -based perovskite ceramic powders were already synthesized successfully by sol-hydrothermal method at lower temperatures.
149. Al Ti C master alloy has been developed over ten years. It is believed to be a better grain refiner for aluminum.
150. TMS 320 VC 5410 is a sort of fixed - point Digital Signal Processor ( DSP ) chip made in TI Company.