cam造句
31. Kelly jumped, whilst Beeney cam to punch, unfortunately Kelly just got there first and the ball fell into the goal.
32. Hollis, Mark, Nigel and Clare at the office, maybe even Cam.
33. I find it very sad that the traditional weekend by the sea cam now be considered a health risk.
34. When Oates took his fancy passing to Boston, Cam Neely thrived.
35. Unigraphics has also added some knowledge and process automation to existing modules, for example its CAM software.
36. Only about a dozen of Douglas's 112 faculty members had volunteered to teach a CAM class.
37. In summer you can enjoy punting along the river Cam, and the Cambridge Festival of music, drama and film.
38. The Commonwealth of Independent States unit also hopes to exploit the need for new or additional CAD/CAM systems and software.
39. For that row, the main carriage has to be set as for stocking stitch, that is with cam lever on 0.
40. This selection of carbonated and still waters cam be found on most supermarket shelves.
41. The upcoming Voxan clearly uses a derivative of the firm's 72, double overhead cam V-twin.
42. So the pattern will start at the right point cam with stitch number 18 of the pattern.
43. Cam, 67, wears a hearing aid and a black beret and walks with a cane.
44. Like the rock skippers, they are adapted for traveling across the land almost faster than a man cam move.
45. However choosing the best position for the N1 cam applies to all types of pattern knitting.
46. With the N1 cam in this position the pattern is not symmetrical about the neckline.
47. To change the cam, you need a front cover gasket, inlet manifold gasket and two rocker cover gaskets.
48. The disaster started when Sandstrom was allowed to skate the puck unimpeded between Cam Neely and Bourque at the left point.
49. I said I always imagined the pattern starting at the N1 cam and spreading out to the point cams.
50. When knitting double jacquard, the cam lever is set to the jacquard or slip position.
51. Modern installations usually use electrically powered cam driven diaphragm pumps.
52. This explains why, when I cam along, I was very unpopular.
53. Designs a new double-stop symmetric cam curve.
54. We cam rollers replacement, double fault also eliminates.
55. Connectivity facilitates design automation and CAM processing.
56. Both the cam and its roller are badly dented.
57. Leave the cam assembly clapper parallel to valve body.
58. The relationship of cam with oscillating follower′s pressure angle and Basic dimensions were analyzed. an developing graphical design method precise soluting The cams basic dimensions was mentioned.
59. Take translational knife-edge plate cam mechanism for example, by analysis and research, results obtained will provide references for precision of cam mechanism.
60. Because CAD/CAM and PDM applications are tightly integrated, they are likely to be implemented by an individual enterprise or software vendor in, for example, CORBA or EJB.
123456789