roughing造句1 I don't mind roughing it for a while.
2 How can you submit to his roughing?
3 You won't be roughing it; each room comes equipped with a telephone and a 3-channel radio.
4 Since childhood, her idea of roughing it has been to check into an economy-class motel.
5 On the next play, Cal was flagged for roughing the passer.
6 Artemis becomes a kind of girl scout roughing it in the woods.
7 He was fired from his job after roughing up a colleague.
8 Whether roughing or finishing, the machinist must set the machine for the given job.
9 In roughing out a retirement budget, what should an individual figure for expenses?
10 One or more roughing tools and a finishing tool are usually required for each job.
11 My days of roughing it in hostels or fleabag motels are over.
12 Start with a roughing tool above the block as it is turning.
13 One or more roughing tools and a finishing tool are usually required for each job. Tools made of cold-rolled steel or stainless steel provide the best wear ratios.
14 Next week we'll be roughing out the work in anticipation of prototyping effort in an upcoming sprint.
15 It is suitable for semi-finishing to light roughing of casting iron, nonferrous metal, heat-resistance alloy and Ti alloy.
16 The roughing technology of a magnesia and carbon brick shop, the carrying condition of the dust control system and the dust effect is introduced in this paper.
17 Roughing setting up mathematic model is adopted in the width control of 1780 mm hot strip mill of Anshan Iron and Steel Group Corporation.
18 Roils for roughing, front finishing stands and vertical rolls of hot strip mills, Rolls for roughing and inter mediate stands of section beam and bar mills.
19 We can sleep on the beach. I don't mind roughing it for a night or two.
20 The centre forward of our school team was sent off the field by the referee for roughing.
21 It's backpacking, but with horses carrying the load and first-class meals, it's not roughing it.
22 Proctor was hit in the pocket by Matt Milner, who was penalized for roughing the passer.
23 The good service results were achieved using laser quenched roughing roll in practical production.
24 This paper introduces the length compute means and control method for cutting head, cutting end and mean cutting operation in bar roughing roll process.
25 This series are universal type VTL, and we can use for inside and outside cylindrical, conical, end and notch of roughing and fine machining.
26 The paper presents reasons and preventing measures for crack of big blank cap happened in roughing tool, which can give some reference for such machine production in future.
27 Based on the results of laboratory experiment, the technical parameters of laser quenching process were selected. The roughing roll of Wire Rod Mill at Pangang was laser quenched.
28 Solution with strong acidity and oxidization was prepared for cleaning , roughing and hydrophiliciting on diamond surface.
29 As for mica type cyanite, using single flotation process including one roughing and three cleanings, good beneficiation indexes were obtained.
30 Generally speaking, bars of steel, forging, castings, etc. are machined to the required shape and size with only one roughing and one finishing cut.
