cylindrical造句
91. Yield and length of fruit among hybrid in Luffa cylindrical Roem had obvious heterosis.
92. Structure can be analyzed and designed by using the axisymmetrical cylindrical shell theory with moment. A series of stress strain and displacement tests are carried out in situ construction.
93. According to the theory of single cylindrical helical torsional spring, the cylindrical helical spring in double direction was designed to realize the test of torsion.
94. The simulation results show that the sheath expands with a decreasing speed and transfer from elliptically cylindrical to circularly cylindrical.
95. The energy flow in the cross-section and cylindrical surface of the air gap is discussed, the field line of Poynting vector is mapped under different loads using these formula.
96. In this paper, the cylindrical gear decelerator is regarded as a repairable system for many faults containing some unrepairable elements.
97. This paper indicates and proves the method of making use of symmetry to predigest calculation of cylindrical coordinates triple integral.
98. Hanging from the walls were large cylindrical shapes, opalescent and organic.
99. For example , cylindrical shapes such as hockey puck can need only two.
100. Method: A set of special instruments was designed, a threading tool can make a threaded Cylindrical bone from the iliac crest.
101. Axisymmetrical bifurcation buckling of multilayer composite circular cylindrical shells under axial compression is discussed.
102. The nonlinear theory of cylindrical helical spring is verified by the accurate measurement of one.
103. To raise the high-speed ground surface quality, this article systematically analyses the cylindrical grinder dynamic characteristics.
104. Using the fluid model and making the plasma as isotropic medium, the microwave field in a cylindrical cavity is obtained.
105. Then scattering field of the more complicated scattering targets, such as a dihedral, a trihedral, or a cylindrical inlet, constructed by the surfaces of ...
106. Gasometer D-1 Vienna, Austria On the outskirts of Vienna, adjacent to the Autobahn, are four cylindrical masonry thanks, 60 meters in diameter and 65 meters high.
107. The stress distribution of curved surface with different shapes, such as cylindrical surface, spherical surface, paraboloidal surface and ellipsoid surface, is analyzed based on Membrane theory.
108. The gunship is 120 meters in length, from cylindrical cockpit to triple bank of sublight engines.
109. As the new products, series200, series320 CNC cylindrical grinder also have been the important part in the domestic market.
110. In the dissertation, the coaxial disk-loaded cylindrical waveguide used in SWS of Relativistic Traveling Wave Tube(RTWT) is discussed .
111. Place a sheet of paper on a horizontal table and put a cylindrical object (e. g. a pencil) on the paper.
112. Tanks may be spherical or cylindrical in shape and are mounted in fixed locations as stationary vessels or on railcar or truck chassis for easy transportation.
113. In Section 6 . 11 the cylindrical cavity problem is discussed.
114. M1320 cylindrical grinder is designed for grinding cylindrical or tapered surface of the small parts, and rubber stick.
115. Considering the effects of coupling mass, the transient dynamic response of a cylindrical lining structure subjected to sudden internal uniform loading is studied.
116. Double row cylindrical roller bearing is applied on machine tool principal axis.
117. Based on the fact, regarding the pipe of direct-buried pipe as cylindrical shell , the article establishes curvilinear coordinates, and analyzes the loading on the pipe.
118. An iterative procedure is required to achieve convergent results. The propeller geometry is defined on a conical coordinate system instead of the traditionally-used cylindrical coordinate system.
119. In order to make the initial design more convenient, some approximate analysis formulae of strength and stability of typical nonuniform stiffened cylindrical shell are also given in the paper.
120. This article discusses the effects of friction coefficient fon the engagement efficiency of involute cylindrical gears and the bending stress of the dedendum.
1234567