bolts造句
181. If the Bolts are tightened under such circumstances, the transmission case may be Broken. The overhaul procedures differ for each model of transmission.
182. In order to study the neutral axis location of high strength bolts in extended end-plate connections, a series of joint tests from portal frame and theoretical analysis were executed.
183. If there is leakage at the flange face-seal only, further tightening of bolts will almost never stop any flange joint leak.
184. It is shown that the dilatancy of rock joints and the orientation of rock bolts are the most important factors in determining the effectiveness of passive, fully-grouted rock bolts.
185. After those six seconds, a shuttle?s twin solid rocket boosters ignite, explosive bolts holding the spacecraft down are severed and the entire stack soars spaceward.
186. Install the retaining angle (12) and doubler (10) loosely in position with one or two retaining angle bolts (11).
187. The epoxy resin poured body is the shell of the current transformer and is fixed on a soleplate through bolts.
188. Emperor Guangwu, being a wise and great ruler, did not get angry, but openly acknowledged his mistakes and presented the guard with a hundred bolts of cloth to reward him for his dutifulness .
189. Assembles pipe sections , tubing and fittings , using screws , bolts, solder, plastic solvent, and caulking.
190. Bolts with drilled or undersize heads shall not be used.
191. Install the bolts attaching the end cap to the front fender.
192. Remove the flywheel or converter drive platDiscard the old bolts.
193. The bottom surface of the clamp arm is connected and fixed with the support arm of the tester by a plurality of screw bolts.
194. Based on practices of turbine bolts hardness test, the factors influencing HL - hardness test results are discussed.
195. He stretched himself on her threshold and uttered his complaints to the cruel bolts and bars.
196. Handan Tonghe Fastener Manufacturing Co. Ltd. is a company specialized in manufacturing fittings for spark plug , inner expansion bolts, drop-in anchor, socket wrench, nuts and screws.
197. In this paper, a series of bolts and shotcrete experiments are made with the model materials which have different soft structure surfaces, and their acting mechanism is discussed.
198. By adjusting the lateral bolts, the clearance that is caused by abrading between the die sleeve and the guiding sleeve will be eliminated.
199. The Bel - Air, that top story of the New Building, was a sort of large hall, with a Mansard roof, guarded with triple gratings and double doors of sheet iron , which were studded with enormous bolts.
200. Rig tong pins, shackle pins and bolts must be secured with the proper size split pins.
201. High - strength bolts and fasteners loaders and excavators crawler board bolts and other mining machinery parts.
202. Install bolts holding front of suspension crossmember to frame rails under upper control arm.
203. Connect the exhaust pipe to the turbo down pipe manifolTighten the bolts to 25 N & middot; m torque.
204. Plasma bolts impacted, squirting through the holes, and igniting the vessels.
205. Visually and manually inspect all fixed gear before using it, including bolts and anchors, and especially those at stations and cruxes where the carabiners see maximum wear.
206. The holes of anchor bolts will be grouted with normal ( Portland, non - shrinkage ) cement mortar.
207. In the rusty metal hulk where he and the cockroach take shelter from dust storms, he keeps a carefully sorted collection of treasures, including Zippo lighters, nuts and bolts, and a Rubik's Cube.
208. Four bolts in the motor end plate dismantles the motor and drive unit complete and crash bar.
209. If table index cylinder is loose, check and tighten mounting bolts.
1234567