auger造句
31. Be credit mark originally " get " , however can because sell the home and " brush auger " between the company trade phonily buy.
32. The higher carrier density in the type-II quantum well results in higher Auger recombination rate as temperature increases.
33. HSS drill bits , auger bit , drillsconcrete core drill bits and chisels, masonry drills.
34. The performance of the counter-flow drier is effected seriously by the kinematic parameters of the sweep auger, especially the revolution speed.
35. The valve at the bottom of auger can prevent drilling bits entering hollow pipe during operation. When drilling pipe is taken out and concrete grout is injected, the valve will be opened.
36. Then I felt the numbing pain of the auger bit crushing my back.
37. The earth auger is the important pilling machine under construction.
38. GaAs - Al _ xGa _ ( 1 - x ) As heterostructure grown by liquid phase epitaxy ( LPE ) has beenstudied by Auger electron spectroscope.
39. In this paper, the horizontal and vertical place of stripping rotor and screw auger were studied, the law of different location affecting the loss was analysed, and the rational place was defined.
40. It manufactures various kinds of tools, such as chain saw, lawn mower, hedge trimmer, earth auger, water pump etc.
41. This coordination was confirmed by UV - visible spectra, X - rayphotoelectron spectroscopy ( XPS ) and Auger electron spectroscopy ( AES ).
42. Some results of quantitative analysis , including depth analysis, on Model JAMP - 10 Auger Electron Mieroprobc are given.
43. Gyre control of Y-55 auger was performed by two motors in series in Water Plant of Shougang Mining Corporation.
44. As a sculptural form the auger is shaped of clay or earth. It no longer functions, as an earthmover but is the very earth itself.
45. Neither of us knew how unstable and heavy that auger bit was.
46. The auger bit and hose bit with panhead tooth are designed. Combined technique of more bits is also innovated and used.
47. The auger of the extruder adopts abrasion - resistance metal powder spray - painting technology.
48. We make a hole in the ice with an auger.
49. This method overcomes the problem of low metering accuracy of vertical auger.
12