enthalpy造句
31. What we define as zero is the enthalpy of every element in its natural state at room temperature and ambient pressure.
32. Because the hydrogen can significantly improve the arc voltage, make hydrogen plasma jet has high enthalpy, when mixed with argon plasma jet, the use of cutting ability is greatly increased.
33. It is used to test the performance of passenger car top loading air conditioner by using air enthalpy method.
34. Heat transfer coefficientcomprising convective and radioactive components may strongly depend on the actual enthalpy and density.
35. On the treatment of the latent heat of solidification, the temperature compensation method and enthalpy method are used.
36. The results show that the temperature difference of fluid takes on extreme point due to the non-linear relationship between temperature and specific enthalpy during the condensing process.
37. For the ECE method, the gas temperature is calculated based on gas components and their enthalpy.
38. The studies both on the enthalpy and on the free energy of adsorption manifest a physisorption process.
39. Increasing the main steam outlet temperature will increases the available enthalpy drop in the turbine.
40. The solvent effects, the compensation of the activation enthalpy ,[http:///enthalpy.html] and the activation entropy were discussed.
41. Using nonlinear programming theory and computer technique for the steam turbine regenerative system, the problem of the feed-water enthalpy rise optimal distribution is solved.
42. In the treatment of the latent heat of fusion, the temperature compensation method and enthalpy method are used.
43. Enthalpy is the amount of energy in a system capable of doing mechanical work.
44. Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
45. It should be noted that, the entropy and temperature at the end point of a isentropic process may be calculated when the pressure ratio and initial enthalpy are known.
46. This brief communication introduces an experiment of hypersonic flow using high enthalpy expansion tube.
47. In this paper, the extrapolation formulas of rocket engine performance parameters are established utilizing one isentropic reference line and two partial derivatives for fixed enthalpy.
48. In studying air-cooling process with humidification or dehumidification, it is necessary to measure the enthalpy difference of air before and after the air-cooler.
49. Main control methods for intermediate-point superheat degree include water-fuel ratio control, enthalpy control, first-stage superheater spray correction, feedwater mild correction.
50. Low energy consumption high plasticity dynamic coextruding machine screw optimally designed with computer, with good mixing effect, even high enthalpy resin temperature and high viscosity of coating.
51. And Henry's law constant is going to tell you whether or not that enthalpy of interaction is favorable or not favorable.
52. Designed the background database model for the Enthalpy Potential test. It can queried preterit data and redraw the data curve.
53. The enthalpy of mixing increased with the increase of temperature and solute concentration.
54. A thermodynamic model of excess enthalpy with three parameters for binary liquid mixtures is established by introducing the internal pressure and energy of vaporization of components.
55. It is necessary to simulate the high enthalpy, high pressure, Mach number and the same concentration of oxygen species as air in hypersonic flight.
56. Polyethylene glycol ( PEG ) is a kind of phase change materials with high enthalpy and low thermal hysteresis.
57. Enthalpy vaporization of 104 organic compounds were estimated and compared with experimental data by the simulating estimation software and the total average error is just 0.864%.
58. To overcome defects of the calorimetric method and actual enthalpy drop method introduced is a concept of the apportionment according to quality of thermification power generation cold source loss.
59. After extending the cleaving-redeformation model for estimating the bond energies, a method for estimating the enthalpy changes of forming carbene has been put forward.
60. Estimations of the isosteric enthalpy of adsorption, free energy, and entropy of adsorption were reported and the adsorption behaviors were reasonably interpreted.
123