brazing造句1, Brazing of copper, copper alloys, silver and molybdenum etc.
2, Brazing of stainless steel under vacuum or protective atmosphere.
3, Other dissimilar materials bonding can benefit by pressure brazing.
4, Different from the traditional active metal brazing, RAB uses a liquid-phase oxide-metal melt at high temperature and the process does not require a vacuum or inert atmosphere.
5, The vacuum brazing technological process relevant to the successful welding of airborne computer cabinet with 6061 material is discussed in detail.
6, Approximate consumption when brazing one cup of the fitting. Actual consumption depends on workmanship.
7, The effects of brazing temperature and time on the structure and property of the brazed joint between graphite and TZM alloys with Ti-based filler in vacuum were presented.
8, Brazing bilayer ceramic composite fabricated by authors with steel in the air have been investigated.
9, The gas brazing and vacuum brazing and the influence of heat treatment.
10, Mixing with silver brazing alloy, can braze copper, copper alloy and steel,[http:///brazing.html] etc.
11, Roger Fabian, Vacuum Technology Practical Heat Treating and Brazing , ASM International, 1993, p .41.
12, The brazing technology for capillary tube-sheet joints has been studied using a self-made flexible controlling equipment of vacuum electron beam brazing.
13, Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.
14, High - frequency inducing brazing equipment and technology of electromagnetic change valve end capo is introduced and analyzed.
15, The brittleness of brazed seam for nickel - base brazing filler metals is always paid close attention.
16, Soft and natural wood, wet wood, very suitable for brazing, planer knives.
17, Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing . Wrot coper is exclusively used for fittings.
18, Brazing quality and product reliability are both increased as using high frequency pulse microplasma arc heating process for assembly brazing of cathode and photoetching grid of electron tube.
19, Using a high frequency induction furnace, the effects of brazing temperature ( T ), brazing time ( t ) and cooling speed ( v ) on microstructure and property of white cast iron have been studied.
20, So, in order to gain good brazed joint in contact reactive brazing, the orientation of the eutectic liquid must be taken into account during selecting an interlayer.
21, The surface cleaning action, caused by the cathode sputtering phenomenon in ion bombardment brazing in glow discharge is investigated in this paper.
22, The mechanics of making both the solder joint and the brazing joint are comparatively similar.
23, FXD gives greater advantages for aluminum, brass, and cast iron welding, brazing and silver soldering by extremely clean burning.
24, The forming mechanism is different in the fusion layer , brazing layerand heat agglomerating layer.
25, About the link between valve body and copper pipe, using advanced welding procedure, brazing alloy in place, without air hole and penetrator, flexible on-off.
26, Medium frequency transformer quenching is used for workpiece diathermy, quenching, annealing, brazing, etc.
27, It shows that the constant-voltage control is an effective method of controlling brazing temperature for strip-welded pipes.
28, Bronze has a higher strength than pure copper, is easily cast, has improved machinability , and is very easily joined by soldering or brazing.
29, The theoretical rules among the high temperature performance of the brazing alloy, strain rate and the function of Co alterant are analyzed.
30, In the paper, the technology and equipment of furnace brazing for AL alloy radiator are introduced. The property of brazed joint is analyzed.