low speed造句61 But recently, the development of it has been slowed down because of problems, such as low speed, low level of service. So the bus traffic cannot develop swimmingly.
62 The only thing that hindered the Fujin's low speed performance was the handlebar shape.
63 The reason and overcome measure of the orientation force and the moment fluctuation of low speed of the Permanent magnetic Linear synchronous Motor are introduced in this paper.
64 The quantitative analysis shows that the numerical simulation cases are different from the experiment results in the place of the transition point, film thickness at low speed area and the zero point.
65 This article introduces an air bubble method for low speed flow visualization in water tunnel.
66 Keys are used for working model, AIS and - low speed controlling, functions switching , alarm silence for excavators.
67 These services range from simple, low speed data links that work over the public telephone network to sophisticated high-speed data services that are ideally suited to the interconnection of LANs.
68 The vessel is to be single fixed pitch propeller propulsion with one (1) low speed diesel engine located aft.
69 The simulation proves indicates that the curve power characteristic can satisfy the requirement of turning fixedly, facility at low speed and the road sense at high speed.
70 Since the BP algorithm has the low speed in studying and can'tensure reach the whole minimum.
71 It is a low speed serial bus protacal, Lin sub-bus is primarily intended for modules like window, door, switch panel and light etc.
72 Plate count method, method dilution method, low speed centrifugalization and dilution medium were taken the verification of methodology.
73 Bidirectional thrust ball bearing can be used for low speed application.
74 The Direct Torque Control (DTC) with round flux trace control has high accuracy and is normally used in low speed.
75 Servo control system is not easily smooth as low speed follow - up.
76 The subsonic vehicle has the characteristics of low speed, longtime flight and low dynamics.
77 The cyclic variation of the combustion pressure in the cylinder of a four-valve gasoline engine was analyzed at low speed and light load with the CB-466 combustion analyzer on the engine test-bed.
78 Used at low speed with a soft muslin buffing wheel, brings up a high gloss on polymer clay pieces.
79 Seabed mining vehicle is hydraulic drive, low speed and tracked alongs - shaped path.
80 M06 High Bright Kaolin has features of high brightness and minor particle. It is suitable to use as dope for high class coating paper and top coat when it is coated at medium or low speed.
81 The formation of "low pressure closed circumfluence region" and the entrainment of vortexes are the main reasons for vectoring a low speed jet.
82 According to the application in the low speed voice encoding device, its operation modes and configuration are introduced in this paper.
83 Firstly, the advantages of low speed high torque motor ere introduced.
84 The torque ripple arosed by the slot effect in PM motor are more significant in the low speed hub motor for electric vehicle use.
85 At the low oil volume fraction and low speed, the oil volume fraction increases rapidly with coordinate x to form the oil pool in the region close to the Hertzian contact area.
86 Gradually add the sifted powdered sugar and beat, on low speed, until fully incorporated and smooth.
87 The low speed efficiency of pump-control-motor speed governing system with inverter is obviously reduced when setting low frequency compensation.
88 Appropriate pitch curve designing is a key of regularly working for non-circular planetary gear mechanism with variable center distance which can be used in low speed high torque hydraulic motor.
89 The flow field of the wing tip vortex, which shed from a rectangular wing, is surveyed by a seven holes probe in a low speed wind tunnel.
90 Three methods of improving low speed performance addition of vibration signals, nonlinear lead network and variable-gain amplifier are emphatically analyzed.