reflector造句
61. Experimental studies of relativistic backward wave oscillator ( BWO ) with a resonant reflector are presented.
62. After emerging from the lamp reflector, the p-polarized light would pass through a half-wave retarder that would occupy half of the beam cross section.
63. The system is composed of off-axle paraboloid reflector, cross line target, background light, imaging collecting system and other devices.
64. This paper describes the test technology about distortions and the measurement results of antenna reflector of synchronous satellite under nonuniform temperature field in vacuum.
65. Bulk Molding Compound is specifically formulated for injection molding of automotive headlamp reflector applications.
66. The horizontal scanning linearity and the design principle of the reflector with CAD were discussed.
67. In geophysics, reflection refers to the seismic energy or signal that returns from an interface of contrasting acoustic impedance, known as a reflector, according to Snell's law.
68. The telescope is the largest parabolic reflector antenna in our country. The technologies used in the telescope are electromagnetics , optics, control, mechanics, structures and civil engineering.
69. The ground plane acts as a reflector to increase antenna gain.
70. The dihedral corner reflector with wing and fuselage joint of aircraft is a very strong electromagnetic source in a wide angular range.
71. The system comprises the collimator with three optical fibers, the beam deflector and the reflector.
72. The angle distribution curve has been given. This conclusion will advantage using the corner reflector reasonably.
73. The manufacturing technology of the reticulated antenna reflector made of Carbon Fiber Reinforced Polymer(CFRP) is introduced in this paper.
74. On the base of relative data of the maximal deformation, studied the factors that effect the deformation of reflector surface of small telescope with bottom support.
75. An antenna was developed to radiate high power, sub nanosecond EM pulse, which consists of a high power wideband mode convertor, a wire frame TEM horn feedback set and a parabolic reflector.
76. High purity aluminum pressed reflector, asymmetrical type, and dazzling controlling ability.
77. The reflector adopts parabolic mirror with chromium - plated finish, high reflectivity and even illuminance in illuminated surface.
78. We will create a non-sequential system with a filament source, a parabolic reflector and a planoconvex lens that couples light into a rectangular lightpipe, as shown in the layout below.
79. Finally, the white side of the 5-on-1 reflector set bounced light from the strobe back up under her hat and added a little bit of a beauty look to the headshot below.
80. A scattered field from a strip grating twist reflector is analysed through the microwave network theory.
81. Continuing along its path, this portion of s-polarized light would be reflected twice by the lamp reflector, and would finally be reflected perpendicularly, by the beam splitter, toward the LCD panel.
82. A corrugated conical horn antenna with high-gain and low-sidelobe feeding the paraboloidal reflector antenna to reduce the cost is designed.
83. The design of an airborne off - set parabolic reflector antenna with low sidelobes is discussed.
84. The composition the optical reflector system is analyzed in detail, eventually a half pentagonal prism is taken to be the imaging devices.
85. Modal analysis is described about the reflector of deployable parabolic antenna with truss structure by using ANSYS soft with its many element types and its powerful programming language APDL.
86. Finally, a thermal cycling test completed in vacuum on a carbon fibre parabolic antenna reflector is also deseribed, and the resu...
87. Coma -- associated mainly with parabolic reflector telescopes which affect the off-axis images and are more pronounced near the edges of the field of view.
88. This paper investigates the effect of reflector surface distortion on the antenna radiation pattern, and gives some reasonable criteria for reflector antenna structure design.
89. The keypoint of mechano - electrical unification design for reflector antennas is brie - fly described.
90. Therefore, the application of the apodization IDT and the metal reflector are two important factors to improve the Q value of the SAW mass sensor.
123456