polyethylene造句
61. Based on the references and analysis, The primary design of the Converter which is a thin layer of polyethylene for fast neutron dosimeter is founded.
62. The first shield: pressure from the extension into the aluminum sheet composed of polyethylene shielding belt, to the dielectric Of 100 per cent coverage.
63. Polyethylene glycol unsaturated carboxylic esterified macromer; Polycarboxylic acid type water-reducer; Molecular designing; High performance.
64. Objective: To investigate the feasibility of swelling hydrogel instead of polyethylene oxide as swelling polymer in push-layer of push-pull osmotically controlled-release tablets.
65. Anti-static properties and strengthen modification of high density polyethylene (HDPE) filled with flake graphite(FG) and chopped fiber(CF) were investigated.
66. Non - Congruent - all - polyethylene were inserted into a validated finite element model of a proximal tibia.
67. In this thesis, polyethylene was chose and its nanocomposites had been prepared successfully via melt intercalation.
68. The dehydrochlorication of polyethylene halide is a simple method to synthesize carbine, especially in alkali solution.
69. Ingredients : France isotonic hot spring water, hyaluronic acid, white mulberry extract, lemon essence, cucumber extract, polyethylene glycol, VE wrapped tablets, acrylic polymers, glycerol etc.
70. It virtually consists of an empty chamber completely lined with polyethylene.
71. The present invention relates to one kind of polyethylene glycol modified zidovudine conjugate and its preparation process and application.
72. In the United States, only 15% of PET (polyethylene terephthalate plastic) plastic bottles can be recycled, while in China, the lower the ratio.
73. A kind of cationic paper strength agent was prepared through the modification of polyethylene imine(PEI) with bisphenol A epoxy resin(BAE) emulsion.
74. This paper modified silane crosslinked polyethylene ( PE ) insulant for power cable with ethylene - acetate copolymer ( EVA ).
75. Dry-wet spinning of UHMW-PET(Ultra-high molecular weight polyethylene terephthalate)is an important way for preparing high strength and high modulus fibres.
76. Ultrahigh - molecular - weight polyethylene has been the most widely used material for the acetabular bearing.
77. Polyethylene glycol monomethyl ether(PGME) fatty arid esters were Preped fain methyl fatty acid ester and PGME in the presence of sodium methoxide as catalyst.
78. Aluminum - polyethylene primary covering used as the sheath for aerial cable.
78. Wish you can benefit fromand make progress everyday!
79. Polyethylene foamed sheet ( film ), is also named as pearl cotton.
80. Include polyoxymethylene, polyamide, polycarbonate, ABS, polyphenylene oxide, polyethylene terephthalate, polysulfone, polyether sulfone, polyimide, polyphenylene sulfide and so on.
81. The modified polyethylene after practical application shows bright requirement of corrosion preventive coating.
82. Computer to use shielded cable, use a small dielectric constant, high - pressure polyethylene for insulation.
83. Acrylate polyethylene glycol monoester was synthesized by condensation of PEG(200) and acrylic acid without water-carrying reaction.
84. This paper reports the synthesis of the N-alkyl derivatives of phthalimide using polystyrene supported polyethylene glycols (PS-PEG)as phase transfer catalysts.
85. Multifilament nylon varieties(line), polypropylene filament(line), Polyethylene and other network products.
86. Grafting of maleic anhydride (MAH) onto high density polyethylene (HDPE), linearly low density polyethylene (LLDPE) and EPDM performed in melt state through ultrasonic initiation was studied.
87. Most single-use beverage bottles sold in the United States are made from polyethylene terephthalate (PET), a substance tested extensively for safety.
88. Teflon, polyethylene, and sapphire are examples of good quality insulators, but avoid materials like phenolics and nylon.
89. The grafting of acrylic acid on to low density polyethylene(LDPE) was studied in solution. Benzoyl peroxide(BPO) and xylene were used as initiator and solvent respectively.
90. When people bought this convenience, what they were really buying was Polyethylene Terephthalate, or PET, the single most important innovation in the industry's history.
1234567