快好知 kuaihz


shrinkage造句
31. The material lost 2 inches per yard in shrinkage. 32. Shrinkage is the retail trade's euphemism for shoplifting. 33. The cement mortar made a little dry shrinkage. 34. A evaluative method of forming shrinkage was introduced. 34.try its best to gather and create good sentences. 35. After eating turtle hibernation, brain shrinkage in the shell. 36. Good carbonization resistance and low dry shrinkage. 37. Since contraction of nodular iron is bigger than its expansion nodular iron castings must be fed from outside to prevent shrinkage defect. 38. It is better to allow for shrinkage when buying cotton clothes. 39. Combining with his own working practice, the writer also proposed some suggestions about how to prevent the shrinkage porosity and cavity. 40. In addition , elutriation, growth, shrinkage and reaction act differently for the different - sized particles in the bed. 41. Central shrinkage porosity and segregation are main defects of high - carbon steel billets. 42. The influence of shrinkage reducing admixture on autogenous shrinkage, workability and compressive strength was investigated. 43. Using short, thin, wide ingate and chill to prevent the shrinkage defects, casting yield was improved by 3%. 44. Higher CE is helpful to improve the self-feeding ability of graphitizing expansion during solidification process, and to reduce casting defects, such as shrinkage and blowhole. 45. With increase of curing period, dry shrinkage crack resistance increases gradually, while thermal shrinkage crack resistance decreases slightly. 46. For shrinkage and sink reduction, molds can be pre-pressurized with gas before melt is injected, or gas can be introduced between the non-appearance side of the part and the mold. 47. The decomposition and delayed formation of ettringite were studied under the temperature match curing (TMC)condition in shrinkage compensating massive concrete. 48. The casting is easy to suffer from deformation, surface sink and internal shrinkage. 49. The paper studied the hydration at ages, shrinkage and the strain of steel bar through experiments. 50. All our towels ranges are rigorously tested for strength, shrinkage, absorbency and colour fastness. 51. Fourth, continued turnover shrinkage of the main force did not show super - large - scale operation of the approach. 52. The effect of converter steel slag powder(CSSP), on the shrinkage characteristic of hardened GGBFS-PC mixed mortar is studied. 53. A semiquantitative prediction model of shrinkage porosity for titanium alloy castings has been established. 54. In this article some measures adopted in mass concrete construction of high rise building are discussed to avoid desiccation cracks, shrinkage crack and seepage. 55. Because the surface of the greater the shrinkage crack, it would be easier to crack. 56. Based on practical application, it is found that continuous rope bleaching machine exerts serious influence on the shrinkage and other quality problems of the knitted goods. 57. Marly crack and deterioration of many bridge deck overlays have been attributed to the traffic load, nature factor and high thermal or shrinkage stress development in the concrete. 58. The quantity and the thickness of commodity concrete is more than normal concrete, which tends to occur shrinkage crack in structure when transporting or pumping. 59. The paper introduces UP resin cures at low temperature and effect of LPA on the control of shrinkage. 60. The effect of the combination of temperature stress and the multi-stress caused by the dry shrinkage, self-shrinkage, temperature shrinkage and plastic shrinkage is considered.