insulator造句
91. It appeared, at first sight, to be a lightning conductor, mounted on insulator through the roof.
92. The insulation characteristic of insulator in vacuum is researched in the process of the high voltage breakdown along the insulator surface in vacuum, which is called vacuum surface flashover.
93. The selection of the insulator applied for a power very low frequency transmitting antenna were studied.
94. AMD switched to silicon - on - insulator ( SOI ); Intel stayed with bulk silicon.
95. To shield the transgene from the affection of chromosomal position effect and improve its expression efficiency, another cHS4 insulator was inserted into the upstream of transgene cassette.
96. At absolute zero, a pure semiconductor has all of its electrons tightly bound and ACTS as an insulator.
97. Dry air is a good insulator, but sea water is not.
98. However, investigation shows that the leakage current is affected not only by the surface contamination of insulator but also by the environmental factors such as temperature, humidity, and so on.
99. We produce porcelain insulator, porcelain bushing, fuse cutout, lightning arrester and composite insulator.
100. A thermally excited cylinder of liquid is required, asymmetrically coated with a ceramic insulator.
101. At present, we have annual production capacity of passenger car carpet 50000 sets, insulator 100000 sets.
102. In addition, an amber is still the best insulator, wide range of application.
103. The cable core line (11) is put through an insulator (1) to be welded with an inner conductor (2).
104. Therefore, the deteriorated insulator and its position can be detected by analyzing the space axial electric field change of insulator string directly.
105. We can estimate whether there is faulty insulator and where by comparing the actual and the measured value of the distribution voltage.
106. At that time, I was fascinated with the metal - insulator transition as envisioned 7 by Mott.
107. In this paper measured data and curves obtained by testing full scale suspension insulator string and jumper wire in large wind tunnel are introduced.
108. Spark-gap length affects the energy of the spark, and the shape of the insulator affects the temperature of operation.
109. The partial discharge and surface charge on organic glass are easier been observed than those on polyethylene, and the organic glass insulator flashover voltage is lower.
110. Fix insulated copper tubular busbar on the steel framework directly and remove wall bushing and supporting insulator. It has strong vibration resistance.
111. A first terminal assembly is secured to the first insulator end.
112. The selection of the insulator applied for a large power very low frequency transmitting antenna were studied.
113. The atoms of an insulator hold their electrons very tight.
114. Its structure is the same as a conventional metal insulator semiconductor field effect transistor (MISFET) .
115. Selection of insulator type, number of insulator string and air space is the main basis of transmission line insulation coordination.
116. In a hot climate the condensation will be on the inner surface of the insulator.
117. Do not isolate , firing or iron Fir Pad to avoid damage the insulator of heating conductor.
118. It is possible to fabricate ISFET entirely using CMOS process. The gate structure of the ISFET is a multilayer, which consists of insulator, poly and metal. So it is called multilayer-gate.
119. The paper shape insulator is heat resistance coil paper or braid or stainless band.
120. The studies on the composition and glazing technique of the black glaze have been made on the basis of the properties of sparking plug insulator containing 95% Al2O3 in this paper.
12345