piston造句
181. A newly developed pipeline plug is composed of a central pipe, balloon, piston, spring, clamp, backplate, inside and outside joints, connecting plate and a wedge key.
182. The reasonableness and limitation of the conception of piston-cylinder assembly element introduced here is discussed and a complete formula for the effective area of piston gage is presented.
183. Sealing coring tools mainly consists of external threaded adapter, balance piston, limit joint, inner and outer barrel, core catcher, locating pin, sealing head and coring bit.
184. Starting from the off-position the piston swings in the first part of its stroke by a defined angle and then clamps linearly downwards.
185. Valve may collide with piston when diesel runs, so we calculate dimensional train.
186. For piston ones, volumetric refrigeration capacities, volumetric compressor power consumption, coefficient of performance and chemical stability are key factors.
187. Based on a thorough study of moulding plane of piston skirt of HS-700 type gasoline engine, the design of variety ellipse section is made.
188. With a hydraulic mechanism, the clutch pedal arm operates a piston in the clutch master cylinder.
189. In the flow divider pintle of variable radial piston pump, the pressure compensator is added in the hydrostatical balance system, then it makes the system to have pressure control feedback.
190. This paper introduced the construction and working principle of Single-cylinder Electric Power Confined Piston Engine, and studied the No-load characteristic on theory and experiment.
191. Based on the dynamical model of DHFPE's(dual hydraulic free piston engine) piston component assemble, the self-sustained oscillation motion of DHFPE was deduced.
192. The structure, wear resistance and wear mechanism of laser quenched layer on the groove surface of the piston head were studied in this paper.
193. The powerplant of propeller aircraft is composed of two main parts, piston engine and propeller.
194. Taking the simplified directionless graphed model of piston connecting rod set as a base, and the detachability calculation was analyzed when the piston connecting rod set were all being disassembled.
195. On November 22 three members of the Indiana Pacers basketball team charged into the spectator area at an athletic facility in suburban Detroit and attacked several Detroit Piston fans.
196. The piston of shoe type brake in shovel loader is used to be chrome plated, which is poor in processing efficiency and expansive in cost.
197. However, in a compressed air engine, no additional energy is gained if the air in the cylinder is compressed on the upward stroke of the piston.
198. It reviews the optimization measures of Al-Si piston alloy, including kinds, chemical composition, grain refinement, modification, alloying and heat treatment.
199. The piston valve design ensures actuation even after many years without operation.
200. Based on the similarity principle, the casting process of piston rings has been investigated by hydraulic simulation in the paper, and the method of reducing rejected products has been searched.
201. The piston rod vibration frequency has little effect on the cavity pressure oscillation amplitude.
202. The piston rod should be fitted with the crosshead bore.
203. Introduces the developments of Water Hydraulic transmission and Water Hydraulic Axial Piston Pump ( Motor ).
204. The Bore is the diameter of the cylinder. The stroke is the distance the piston travels from BDC (Bottom dead center ) to TDC(top dead center). The Bore is always mentioned first.
205. The PG Series is low profile with true parallel motion that is generated by a pinion mechanism powered by a double acting piston.
206. This paper presents a finite-volume method for flow characteristics simulation in a combustion chamber with a flat-topped piston during the compression stroke.
207. As the displacer begins to move down the piston continues to move up and the cold gas is transferred to the hot end of the cylinder and the cycle starts again.
208. Make sure of the pilot burner ignition and open the F. O piston valve for main burner light off.
209. First the dynamical model of DHFPE's piston component assemble is built. The motion of DHFPE is self-sustained oscillation with variable rigidity and variable damp.
210. Note that the compression ratios shown above reflect the expansion ratio, which is the ratio of the combustion chamber volumes when the piston is at Bottom dead centre and Top dead centre.
12345678