spindle造句
181. High - speed router: 4.5 KW main spindle, vacuum absorption, DSP control, fit table for Large - scale processing.
182. Put in the drawbar to the spindle shaft center hole.
183. Tangential grinding forces are obtained through monitoring spindle power and the ir variations are studied with process parameters such as depth of cut, feedrate and wheel grit size.
184. Through analysis of high-speed electric spindle run-time no-load test curve, it comes to test electric spindle the stability time and vibration performance.
185. Based on the theory of vibration of spindles and much experimental work, analysis is done to the sphere of spindle pivot on the anti-vibration performance.
186. If you'd like custom-made, please beware of the distance between spindle center and Fixed Block center. Also, please indicate the dimension and position of the Fixed Screw on the flange of spindle.
187. In internal Grinding of Deep-Hole, the internal grinder spindle presentsslender structure, thus the stiffness as the problem of the machine tool systemarises.
188. Hemangiopericytoma is an uncommon vascular neoplasm originating from spindle, plump or mixed cells around the capillaries which Zimmermann had called pericytes.
189. The recoiling spindle layout of processing equipment for foil is sorted into fixed type, swinging arm type and horizontal moving type, thus different mechanical structures have been formed.
190. Under the skin stomatal more, to defend the cell Depression, Changcheng oval or spindle.
191. High machining precision and low surface roughness may improve the main spindle rotating precision and decrease the wear of the main spindle.
192. The calculated results of rolling bearing stiffness indicate that larger preloading and constant pressure preloading for the rolling bearings of the spindle can improve the stiffness of main spindle.
193. And using its recognition result, carries on the main spindle dynamic analysis, will instruct the later main spindle components using the dynamic analysis result the main spindle design.
194. Gliosarcoma is a rare primary brain tumor that is composed of neoplastic glial cells mixed with a spindle cell sarcomatous element.
195. Results: Primary cultured RPE cells contained large amount of pigments in polygonal shape. Passages of cultured RPE cells presented transparent spindle shape.
196. Results:By microscopy, malignant melanomas were composed of epithelioid, spindle, small, signet ring,[http:///spindle.html] balloon and rhabdomyoid cells.
197. The main spindle system is a key part on the machine tools. The quality of thermal behavior influences the machining accuracy of machine tools directly.
198. A gear wheel lock mechanism is also provided to prevent the wheel spindle from rotating during installation or removal of a grinding wheel on the wheel spindle.
199. Integral spindle coolant system decreases the high temperature and ensures running accuracy after long time working.
200. This paper presents the principle of a new frame-type strander, indicating the difference between the new line and the traditional line using spindle drive.
201. The purpose of analysing spindle motion curve line is to select the best cur.
202. The body is spindle - shaped and only slightly compressed laterally.
203. The plane of cell division is, in turn, determined by the orientation of the mitotic spindle.
204. With the synchronous spindle the spindle rotation and the feed motion are synchronized by an electronic regulation according to the lead of thread.
205. The velocity change at the contact point between the plate and spindle, forming roller was analyzed.
206. Average type beam drill is composed of base , inside and outside column , rocker arm , main spindle box and job.
207. In this way, the vacuum gas oil or spindle oil and the lubricating bases are separated by means of lateral extractions while an asphaltic component or fuel oil is separated at the base.
208. Objective To study changes in ultrastructure of soleus muscle spindle induced by simulated weightlessness in rats.
209. Analysis of signal indicates that the sampled signal consists of torque signal and radial pulsation of machine tool spindle signal.
210. Spindle breakage during hot steel rolling is a long standing problem encountered in an Australian steel plant.
123456789