cogging造句
1. The cogs gear smoothly.
2. I decided to set up my own business because I was tired of just being a cog in a machine.
3. The wheel engages with the cog and turns it.
4. The two cog wheels engaged and the machine started.
5. When the large cog wheel engages , the mill stone will start to go round.
6. Tired of being a tiny cog in a vast machine, he handed in his resignation.
7. The teeth of the cog should fit into these grooves.
8. Mr Lake was an important cog in the Republican campaign machine.
9. The firm tries hard to make its employees feel that they are more than simply cogs in the wheel.
10. If the cogs don't mesh correctly, the gears will keep slipping.
11. One cog - wheel engages with another.
12. He's joined the Liberal Party, and now he's a very important cog in the cabinet.
13. Its members take on the characteristics of mechanical cogs, performing their prescribed chores until they are worn out and replaced.
14. The steering is pin sharp and the delicate gearshift absolutely superb, swapping the cogs with a velvet action.
15. The lime kiln belly rotated on giant cogs into the dark of the next chamber.
16. Silver Reed and Knitmaster owners should make sure the patterning cogs spin freely.
17. During a comical lesson on how to catch her man, Little Cog is told she must weep not buckets but spoons.
18. I hear them in there pry up his forehead like a manhole cover, clash and snarl of jammed cogs.
19. As cogs in the Soviet military machine, the three countries' armies used to sit mainly near their western borders.
20. Our cog was a sturdy merchantman escorted by a small man-of-war.
21. The first stage is called primary rolling, or cogging.
22. There are two causes or cogging force in linear permanent magnet motors, resulting from the slotting and the finite length of the iron-cored.
23. The cogging torque can be reduced efficiently by suitable selection of the relative angle between dual stators .
24. However, their cogging torque or unbalanced radial force is usually high, deteriorating the machine performance.
24.try its best to collect and build good sentences.
25. The accurate calculation of cogging torque assists in optimizing the design of claw pole permanent magnet synchronous motors.
26. Cogging torque is one of the main concerns of permanent magnet motor.
27. Due to the interaction between the permanent magnet and slotted armature lamination, there exists cogging torque in slotted permanent magnet motors, which may cause noise and vibration.
28. Being based on the expression, the effect of pole arc-coefficient on cogging torque is studied.
29. Theoretical analysis shows fractional slot winding can effectively reduce the end of windings and cogging torque.
30. On this basis, back electromotive force without load and with load is researched, simulated and analyzed, and cogging torque is analyzed and calculated in different dimensions of magnetic steel.
12