combustion造句
(91) The spray combustion flow and heat transfer progresses of dual-operation LOX/Hydrogen engine are simulated with the models and method founded in this paper.
(92) Combustion noise contributes a major part to diesel engine noise.
(93) A novel cylinder pressure recognition method for internal combustion engines is proposed.
(94) According to its combustion characteristics, the design requirement of blast furnace gas boiler is discussed.
(95) By means of analysis on ignition fail reason of auxiliary combustion chamber for catalytic cracking unit, the unreasonable place existed in igniter was found, and improvement plan was given.
(96) The "yellowish-white liquid" sounds suspiciously like gasoline, and perhaps Vimanas had a number of different propulsion sources, including combustion engines and even "pulse-jet" engines.
(97) The calculation of mass combustion rate directly reflects the effects of turbulent on combustion.
(98) Success is not the result of spontaneous combustion. You must set yourself on fire.
(99) Effects of main operation parameters of the incinerator system on stable combustion process are analyzed.
(100) Combustion temperature and speed of bio-diesel fuel in the pre-mixed combustion period is higher than that of diesel fuel.
(101) Smoldering and ignition caused by radiation are special phenomena in disaster combustion and don't exist in modern combustion equipment.
(102) In 1963, we evaluated an infrared vacuum combustion, gas heating system.
(103) Related to bond polarity, formal charges on atoms, chain reaction theory and the comparison of solid monopropellant combustion and modeling, the "linkage mutualism"mechanism was proposed.
(104) Realizing furnace optimum control is based on combustion control, and that combustion control key is air fuel ratio control.
(105) Based on the experimental results, and lastly analyzed the non-stable and cyclical process characteristics of regenerative combustion different from conventional combustion.
(106) To accurately describe the fuel combustion and radiative heat transfer processes in furnaces is very crucial in comprehensive numerical simulation of ethylene pyrolyzer.
(107) A model describing the process of the crack combustion and propagation in solid propellant was formulated.
(108) In this paper, optimizing control of calcining heat and fuel combustion in a ring-type calciner are expounded.
(109) In this dissertation, based on analysis for the combustion in a constant volume combustion bomb, the parameters such as combustion delay period, combustion-flame propagation have been investigated.
(110) A plurality of oil passages are formed in a shaft body of a rocker shaft, which partially constitutes a valve drive system of an internal combustion engine.
(111) The gas burner throughly mixes fuel and entrained air to form a nearly stoichiometric mixture prior to combustion.
(112) The main factors, which affect the combustion stability of destructor is analyzed.
(113) Rotary engine: Internal-combustion engine in which the combustion chambers and cylinders rotate with the driven shaft around a fixed control shaft to which pistons are attached.
(114) The two principal combustion products are water vapor and carbon dioxide.
(115) At high pressures, the combustion model should include droplet heating as well as phase change.
(116) The Combustion rate is lower than that of the gasoline, but greater than that of the LPG.
(117) In the present study, we propose to use coal combustion fly-ash, an industrial waste that contains about 4.1 wt. % of lime (CaO), to sequester carbon dioxide by aqueous carbonation.
(118) The resulting combustion gas mixture, in which the reaction is occurring, then passes into a reaction zone where completion of the carbon black forming reaction occurs.
(119) Alcohol-based fuel is the best substitutional fuel, it can't be generalized because of low heat and lacking efficient combustion.
(120) Based on the wave theory, finite element theory and combustion of combustion pressure oscillation in D.
123456789