anode造句
181. Positioning plate is usually used in fixing the place of anode plate and cathode plate in electrobath.
182. Bridge, Steel Pipe Piles sacrificial anode installation and welding of underwater construction.
183. It is the prerequisite for high efficiency, high quality produce to have the complete automatic anode plate working aircrew, so it is very important to realize high automatic anode plate plan aircrew.
184. One kind of down-hole full-spectrum acquisition controlling sequence generator and anode high-voltage converter is synthesized, which is suitable for pulsed-neutron synthesized logging tool.
185. The paper analyzes the impact of oxygen in anode sheet on electrolyzed copper production and studies how to control oxygen content in anode sheet in pyro -metallurgical refining process.
186. While adopting the indissoluble anode to electrolyze, it can play a role in controlling the grain size of the electrolytic copper powder effectively, but the output is lower.
187. Amorphous carbon nanotubes (ACNTs) were firstly synthesized with carbon rod as anode from coke powder using Ni as catalyst in He and C2H2 medium at negative pressure by the arc discharge.
188. Photocell: or photoelectric cell, or electric eye; Solid-state device with a photosensitive cathode that emits electrons when illuminated and an anode for collecting the emitted electrons.
189. Completion of the control requirements, the eventual realization of pre - baked carbon anode blocks Health organize tasks.
190. The gain of the PMT, that is the ratio of anode output current to the photoelectric current from the photocathode, is directly related to the supply voltage.
191. The effect of pore structure in the anode catalyst layer on the performance of direct methanol fuel cell(DMFC) was investigated using ammonium carbonate as a pore former.
192. A mathematical model of heavy oil flux about rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
193. Then the anode voltage was increased - the amp is running at 350 V instead.
194. Results show that the composite improves the first cycle columbic efficiency and cycle life of anode materials effectively.
195. The research works in the field of inert anode are reviewed, including metal oxide ceramic anode, alloy anode, cermet anode.
196. Moreover, the anode detector head and the cathode detection handle are used to acquire bioelectricity data.
197. The anode process of PEFM is introduced at first, and then the influence of working gap and frequency with the anode process of electrolyte is analyzed.
198. It is a common knowledge that the anode material accounts for over 40% of the total cost of lithium battery and lithium manganate is the most promising anode material.
199. The cathode is hung on an anode bar, and a cathode bar is arranged on a nylon pulley and driven by a motor and a crank connecting rod to do reciprocating translational motion.
200. Recent studies on anode materials for lithium ion secondary battery are reviewed.
201. A high silicon cast iron is used an auxiliary anode and sidewall installation for fixing anodes.
202. Titanium anode coated with metal oxide is a new insoluble anode,[http:///anode.html] which is also named DSA.
203. This article analyses the electric energy loss of adjusting the line current by stages, which has a bigger wave motion when the anode effect happens-a phenomenon peculiar to aiu-minium reduction.
204. The fabricated triode flat display possessed better field emission characteristics and larger anode current.
205. Thus the anode quality is one of the key factors influencing the proper operation reduction cell.
206. The ultrasonic technics was applied to anode oxidation of aluminum. The influences of ultrasonic on anode oxidation curves, electrolytic process parameters and oxide film's morphology were studied.
207. The carbon anode consumption was measured in laboratory aluminium electrolysis cells.
208. Moreover, the anode chamber has not presented the acidified phenomenon.
209. Choose anode or cathode electrophoresis according to the electrophoresis process and coating.
210. The invention relates to the field of battery manufacturing, and discloses an anode ring sleeve feeder machine and a sleeve feeder system accompanied by the sleeve feeder machine.
12345678