creep造句
211 The properties of CBN wheel in creep feed grinding the high temperature alloy and the characteristics of electroplated CBN wheel are introduced.
212 It is found that the frequency creep caused by superradiance usually results in this kind of limit cycle like oscillations.
213 Finally we have studied the magnetic field sweep rate dependence of flux jump, and discussed the influence of flux creep on flux jump.
214 Research reveals soft clay creep phenomenon is caused by soil internal structure change constantly and self-adjustment and reconstruction.
215 The creep rate was increased while the yield strength was reduced by anodic dissolution.
216 The second law can be applied to the prediction of creep failure, such as rockslides, colluvial-deposit landslides and loess landslides as well as clay landslides with locked patches.
217 The principle of time - temperature superposition ( TTS ) which can accelerate creep test of geosynthetics is introduced.
218 The creep damage and cycle stress relaxation are found to be greater when hold time is increased and the crack propagates from transgranularly to intergranularly.
219 The grind-hardening for two kinds of widely used middle carbon steels were carried out on a surface grinder by creep feed dry grinding, and the characteristics of the hardened layer were studied.
220 PK multiple V-belt is applied as transmission belt to resist wear and abrasion and avoid troubles like belt creep and noise caused by traditional belt transmitting system.
221 At last creep FEM step-by-step method for simple structures and creep FEM step-by-step concealment method for complex structures are presented.
222 A method of predicting the residual creep life of aluminum alloy 2A12 by using indentation test method with flat cylindrical indenters was proposed. There were four steps included in the method.
223 Grind - hardening of non - quenched steel was performed with creep feed grinding mode and different cooling conditions. Microstructure and properties of the surface hardened layer were compared.
224 Egos creep in and erects big wall between us and we can not rejoin.
225 The long fiber thermoplastic material for forming composite muffler systems also provides increased impact strength and creep resistance as well as chemical and thermal resistance.
226 The stress relaxation and creep experiment on meso-position portrait between normal and morbidity head of femur cancellous bone were proceeded.
227 Stress-strain curves at the end of designed life and creep reduction factor of georgia RS50 are determined, which could be used as reference for engineering design.
228 A simple and efficient analytical method of creep recovery stress is provided. The effect of creep recovery is demonstrated by a numerical example.
229 On the early stage side, we've seen a little bit of a price creep, but not much compared to later stage investments which have to price relative to current public market valuations.
230 This paper gives a brief introduction of how TCA solves creep problems by using finite element method and initial-strain method, TCA's features and structure, and some application examples.
12345678