cylinder造句
181. The utility model has the advantages of ensuring the fault paper from entering an impression cylinder and preventing accidents of the device and the product quality caused by fault paper.
182. When the exhaust stroke starts, the cylinder is swept out by the upmoving piston.
183. Air-injection engines use a blast of highly compressed air to blow the fuel into the cylinder.
184. The molecules of air would bombard all sides and both ends of the cylinder.
185. To achieve continued growth, John Deere (Ningbo) Agriculture Machinery Co. Ltd has started the cylinder manufacturing business. At the same time, it is launching projects of other product lines.
186. The operation state of impression cylinder was monitored to find out the characteristics of the machine.
187. The calculation methods for the burst pressure of gas bottle, thicknesses of the steel cylinder and the fiber reinforced composite cylinder are given.
188. The cylinder head water jacket of a high speed diesel engine is analyzed by using CFD technology.
189. The test on the(influence) of changing fuel supply advance angle on fuel economy was carried out on single cylinder diesel engine separately using diesel fuel and ethanol-diesel blend fuel.
190. E85 has a higher octane rating (104 RON) than gasoline, making it more resistant to harmful pre-detonation, or "knocking, " when the fuel/air mixture is compressed in the cylinder.
191. Based on deductive inference from mathematic model and practical measurement on site the method for evaluating the balance of horizontal single cylinder diesel engine is presented in this paper.
192. As the aerosol goes through the inner cylinder of the cartridge, the water vapor diffuses into the silica gel through the mesh screen.
193. The results expatiated that the strength of such cylinder head gasket meet the need when being used.
194. The hydraulic system of injection molding machine is the representative example, it need to control cylinder speed and hold pressure, so it indeed to use pressure and flow rate multiple valve.
195. Later designs reduced the rigging, so that each bogie had a cylinder or, on modern trains, each wheel or even each block had its own brake cylinder.
196. In this paper, the method of analytic descriptive geometry is applied to set up the parameter function of the intersection line ofparaboloid and cylinder whose axes are inclined to intersect.
197. The drum scanner gets its name from the clear acrylic cylinder, the drum, on which the original artwork is mounted for scanning.
198. Diesel engine: Internal-combustion engine in which air is compressed to a temperature sufficiently high to ignite fuel injected into the cylinder, where combustion and expansion activate a piston.
199. After use for a long period, the push rod can push and pull with no-load, cannot push and pull with load, replace the sealing piece used for the upper hole of piston in the oil cylinder.
200. Later, Laennec built a hollow wooden cylinder and named it the stethoscope.
201. The single standing wave mode in a circular cylinder subjected to a vertical oscillation was studied by employing two-time-scale perturbation expansions.
202. Upsetting of circular cylinder between ordinary plat platens is studied through the optical plasticity.
203. The jacking cylinder is one of the key equipment used in Sheng - li # 2 drilling platform.
204. Basically, this compressor is not in the oil cylinder, the piston ring and packing usually PTFE.
205. The induction quenching process of cylinder workpiece is analyzed, and the temperature distribution and its variation with time are obtained.
206. Displacement indicates engine size, and compression ratio compares the total cylinder volume to compression chamber volume.
207. The volume of each cylinder reflects the iteration's overall relative level of effort (LOE) in terms of person-hours.
208. The solidification process of the cross-section A-A of the high pressure inner cylinder is simulated and the shrinkage cavity position is predicated by means of utility software.
209. Position Indicating Switches are available for use on double-acting cylinder actuators.
210. The fast cooling technology of steam turbine is the process that the cooling medium is used to accelerate the temperature reduction of cylinder and rotor after the shutdown of turbogenerator.
12345678