abrasion造句
61. The abrasion, press and rigidity of squeegee determine the print quality.
62. Also , severe biofouling, physical abrasion, and chemical etching of the glass may erode the sensing surface.
63. The type of Complex Wave formed due to the abrasion is very divergently shaped.
64. For example, "defend radiation", "anti-electrostatic", "high abrasion proof", "suction dust" etc. function.
65. It ? ? s application tests showed that it was perfecter oligomer with flexility, weatherability, adhesion, hardness, abrasion resistance.
66. The results indicate that oil-distributing pair runs in boundary lubrication condition, and it is mainly abrasion wear.
67. The rivet heads are in good condition and without abrasion.
68. Effect of microelement on the microstructure and wear resistance property of special brass have been investigated by SEM, abrasion machine etc.
69. The main wear mode of PPS is changed from adhesive wear into abrasion wear with the addition of PTFE and kaolin nanoparticles.
70. It is demonstrated that the manganese alloyed cast iron has high strength, good rigidity, dimensional stability, compression resistance and abrasion resistance.
71. The abrasiOn wear of ore-accumulation drive-over hopper is an important factor restricting increasement of equipment operation rate and production capacity.
72. A new test device which determines the abrasion and friction coefficient of rollers was designed.
73. Eutectic composition should be adopted for high - Cr white cast iron used under high - stress impact abrasion condition.
74. Highly resistant to abrasion, sea water, crude and fuel oil.
75. The shot-blasting machine discharge valve has flexible operation, reliable seal, uneasy abrasion and good consistence for the double-valve control.
76. The main symptoms were subconjunctival hemorrhage, corneal epithelial abrasion, eyelid skin laceration.
77. Is the abrasion paper attached properly to the abrading plate?
78. An experiment using electric resistance analogic method was carried out to study the surface abrasion of the internals in circulating fluidized beds (CFB).
79. Semicircle steel sheets were welded on the wall of evaporation pipes in fluidizedroaster for anti - abrasion.
80. The yarn is extremely du - rable and highly resistant to abrasion , ozone and biological attack.
81. This product is highly elastic, and flexibility, abrasion resistance and flame resistance.
82. They have found a main reason of poor abrasion resistance of the first cane mill roller is due to its poor casting quality during melting and casting.
83. Foreign body in the erosion and abrasion, or loose fill the loss of this flexibility is sealed letter fill the main reason for failure.
84. Lubrification degradation of low sulfur diesel oil causes oil pump abrasion of engine.
85. Conclusion Occlusal splint removable denture was effective in the treatment of TMD with anodontia and serious dental abrasion.
86. Test show that wear loss of developed friction disk is less, anti- abrasion properties and employment lifespan is superior to that of asbestos friction disk either in normal or sliding case.
87. Objective To investigate the relationship between tooth abrasion and long - term chewing betel nut.
88. Compounding with the PUD , many improved properties can be contributed to the paint film, such as high hardness, gloss, buildiness, adhesion and resistant to water, chemicals and abrasion etc.
89. Abrasion tests were carried out for the walls of pipeline for iron ore concentrate slurries by connecting a length of test pipe in series with the pipeline.
90. RESULTS To build effective system and decrease abrasion and uselessness of oral apparatus.
123456