corrosion造句
241. It has high and low temperature resistance, corrosion resistance, non-absorbent and other excellent features.
242. The corrosion resistance and weatherability of color polyethylene coated steel pipe were investigated.
243. Antimonial lead is preferable to chemical lead because of its greater corrosion resistance and strength.
244. Corrosion caused by a reaction of an amphoteric metal with the alkaline products of electrolysis.
245. At least one source of the corrosion is the small amount of outgassing through the battery vents that takes place when the battery is in use.
246. It features its detergent being edible hydrochloric acid and its corrosion inhibitor comprising urotropine, thiocyanate and thiourea.
247. In order to discuss the possibility of stainless steel as bone of concrete instead of plain carbon steel, the corrosion behavior of the plain carbon steel...
248. A notched specimen is designed to simulate the corrosion reaction at crack tip.
249. Effects of technological conditions on sealing quality, uniform colour, corrosion resistant are analyzed. Ways of getting excellent electrolytic colouring quality are discussed.
250. The results showed that the intermediate tie rod was fractured by corrosion fatigue.
251. Mannich base is a corrosion inhibitor with superior property and is applied widely in acidizing treatments.
252. Parts separating two pressure chambers , a corrosion allowance shall be provided on (strikethrough: either) each side of the parts.
253. The major cause of failure of VRLA batteries, including grid corrosion, water loss, premature capacity loss and thermal runaway, are discussed in this .
254. The analysis of the corrosion in refinery low-pressure fluid seal gas holder reveals that the corrosion is mainly caused by the sour gas containing H_2S and CO_2, etc.
255. By investigating the change pattern of wet-etching rate at different depth and surface parameters before and after corrosion, the depth of polishing redeposition layer was estimated.
256. The influence of some environmental factors on the corrosion of steels used in construction machinery was studied by the grey relationship analysis methods.
257. Advanced tests like corrosion resistance to molten aluminium, thermomechanical properties, thermal conductivity and microporosity are discussed in respect of application areas for Bonite.
258. One significant factor which can affect azole stability is the use of halogens for microbiological control in systems using azoles for inhibition of yellow metal corrosion.
259. The corrosion weight loss rate and impact toughness of high Mn steel in hot concentrated caustic solution were studied by using immersed corrosion, impact test and SEM.
123456789