miscibility造句
1. Preview study of miscibility usually is how to make blends miscible while the microstructures of the miscible blends were not reported.
2. Various method to determine the minimum miscibility pressure (MMP) of CO2 flooding was evaluated on the basis of slime-tube displacement test data.
3. Miscibility and crystallization behavior of PTT /PBT blends, together with its spinnability were studied.
4. The miscibility and the storage stability of ethanol-diesel fuel in low and ambient temperatures are investigated.
5. First contact miscibility is found when the original reservoir fluid and the injection gas are miscible.
6. Ultrasonic attenuation can characterize the miscibility and phase morphologies of polymer blends.
7. The miscibility of these copolymers with phenoxy resin is studied.
8. Miscibility of blends was investigated via differential scanning calorimetry ( DSC ) and scanning electron microscopy(SEM). The results show that PPES/PES blends are miscible in all compositions.Sentence dictionary
9. By improving miscibility , the polymer blends could enhance the mechanical property. This was a new way to prepare new polymer material.
10. The miscibility of CS blends in formic acid was characterized by solubility parameter, dilute solution viscometry, refractive index and glass transition temperature, FT-IR etc.
11. Miscibility and Crystallization Behaviour of Biodegradable Polymer Blends , Beijing University of Chemical technology , Zhaobin Qiu.
12. A thermoplastic polyurethane elastomer(TPUE) which has good miscibility with NG is synthesized and used in thermoplastic composite solid propellant propellant(TCSP).
13. Finally, the MMP on the basis of multi-contact miscibility is bigger than the real result and the errors according to the EOS and experienced formula is big generally.
14. The composition of the original oil and the injection gas are both located on the single-phase side of the critical tie-line: The oil and the gas exhibit first contact miscibility.
15. At room temperature, the effects of different dissolvent on the miscibility of diesel with industrial methanol and industrial ethanol are researched respectively.
16. The method of solubility parameter was used to predict miscibility of polymer blends.
17. When increasing hard segment content, the interaction between SPU moleculars is intensified whereas the miscibility of the blends in decreased consequently.
18. A brief introduction is given to the application of three dimentional solubility parameters to predict miscibility of PVC / homopolymer , PVC / copolymer and PVC / heterochain polymer blends.
19. The slim tube test may be the most accurate method and can achieve duplicating results to determine the minimum miscibility pressure.
20. Due to the plastication and interpenetration, SBS with mobility and miscibility were improved as a hot-melt adhesive.
21. This allows the particle morphology to be controlled and prevents pronounced interpenetration of the different layers despite their miscibility.