mortise造句
1. Replace all old surface-mounted bolts with key-operated mortise security bolts.
2. It had a mortise lock, a simple keyhole and no key.
3. Fit a five-lever mortise lock to the back door, or supplement the existing lock with a mortise deadlock.
4. To fit into a socket mortise.
5. In addition , mortise holes were made on the full - size timber, and resonant frequencies measured sequently.
6. Mortise and tenon structure can withstand a nail than furniture made of greater tension.
7. Uses mortise lock that is inserted inside the door for maximum safety.
8. The tenon does not conform to the mortise , so it can not fit into the mortise.
9. Mortise lock —the lock body is inserted into the door edge, the lever and escutcheon are installed on the surface of the door.
10. The distal tibiofibular syndesmosis is important for ankle mortise stability, weight transmission and walking.
11. The artist magnifies a part of mortise and tenon joint, so that the nature outlook in Chinese ancient times could distantly correspond to urbanization process of armoured concrete.
12. The arm and post are then lined up and the mortise marked off on the arm from the post.
13. The seat of the chair is a straight forward mortise and tenon construction apart from two considerations.
14. Wooden framed windows are best secured with locks resembling small mortise security bolts.
15. When end grain must be joined to edge or face grain, the joint of choice is the mortise and tenon. More on this later.
16. There's a copper hoop on top with wooden pole, and under stalk there's an iron mortise.
17. The fixed unit is a fixed plate with a dovetailed tenon and a dovetailed tenon mortise.
18. The results showed that the resonant frequency decreased slightly with increased number of mortise holes.
19. Factory machining can prepare the door to receive cylindrical, tubular, mortise, unit , and rim locks.
20. It includes the concept of stress correction coefficient, a new method to determine the stress concentration factor of mortise of a disk and a new method for correcting the stress ratio.
20. Wish you will loveand make progress everyday!
21. The properties of mini-finger joint in corner, dowel joint . tenon and mortise joint were compared and studied through experiment.
22. A joint of the vertical pile with power - wasting gap is brought forward based on tenon - and - mortise work.
23. And there are any metallic connectives on this bed, joggle is between bed leg and bedplate, craftsman certains ably good mortise, this bed combination is together.