extrusion造句
61. The result shows that the NSI value of the cottonseed meal can be 29.92%, which is near to the result got with the cottonseed without extrusion.
62. The metal flow during indirect extrusion is analyzed, and the influence of billet machining on the quality of aluminium tube is also investigated.
63. With metallocene elastomer as toughening resin, Polypropylene is modified in blending toughening and produced into blown film by water-cooled downward extrusion method.
64. The advantages and the broad application prospect and significance of extrusion cooking on the preparation of cheese, caseinate and fat analogues etc. were str essfully discussed in this paper.
65. During extrusion processing , complex physicochemical changes take place in material components.
65. Wish you will loveand make progress everyday!
66. In this paper, reactive extrusion was used to prepare flame retardant PA6 with in-situ formed melamine cyanurate(MCA) from reaction of melamine and cyanuric acid carried out in twin-screw extruder.
67. The utility model relates to a perforating bullet case blank precision cold - extrusion die.
68. The existing cold extrusion, Chong pieces, polishing, oxidation, silk screen, assembly, production, pipeline technology.
69. The cold extrusion of sleeve with special shaped interal gear is experimentally researched. The backwardextrusionradial extrusion.
70. ... mould, plastic mould, punching die, casting mould, extrusion die, proto , hot runner mould.
71. The author proposes a local extrusion ratio method to determine the location of extrusion die hole.
72. For the defects such as dead zone and shrinkage cavity in conventional extrusion process, an inner cone punch was proposed to improve the metal flow behavior.
73. Characteristics Good physical properties, excellent transparence, good melt, good workability, light colors, for extrusion molding.
74. Neural network method was used the parison swell by the die temperature and extrusion flow rate.
75. Its overall objective is to enhance the quality and output of China's large aluminum extrusion production, and establish hydraulic double-action short trip extruder.
76. Normally, various shape steel materials required to pass through forging extrusion processing, and just purchased a flat plate were present in the plane of the physical properties.
77. One of cold extrusion, the temperature was that I squeezed the Department of specialty products.
78. The influence of extrusion factors on product power per energy unit was investigated and a mathematical model was established.
79. Figure 1 shows the extrusion blowing line production processes and the main part of the line.
80. The material of the plier cover, the extrusion parts design and die structure were introduced. The technology parameter, the selection basis and...
81. Apply to the injection molding, extrusion, casting, and so on.
82. In this paper, the numerical solution is got through analyzing the direct extrusion procedure theoretically, that can describe the differential equation of metal flowing accurately.
83. The control system of those march-past meters is always applied into the plastics extrusion line for automatically supervising and controlling.
84. It employed different process planning methods in terms of different structures of plastic profile extrusion die.
85. The main factors for cable cracking are related to selection of cable compound and extrusion process. The cable cracking may be also caused by inappropriate application and storage of materials.
86. Using bauxite, clay, mullite as main raw material, and adding some amount of sillimanite , andalusite and kyanite, honeycomb ceramic was prepared by extrusion method.
87. The casting - rolling ( CR ) and extrusion procedure for processing copper coil tube have been compared.
88. This paper introduced the manufacturing process of bore bit warm extrusion technology, main technological parameter and mold design process.
89. There are lots of advantages by cold extrusion for straight knurl nut in a single process.
90. The ultimate tensile strength and elongation of extrusion bar after forging process was much higher than that of the direct extrusion bar.
12345678