lithium造句(211) The LUMO orbit energy level of polythiophene turned negative with the lithium ion intercalating into, and became the positive pole of the cell reaction that received electron.
(212) The origin of optically induced refractive index in lithium niobate is presented.
(213) Analyses the source of non - condensable gas and its bad impact on Lithium Bromide absorption chillers.
(214) It is generally made by cooking ammonia, lithium and pseudoephedrine, a decongestant.
(215) Good conductivity, high lithium - ion transference number and wide electrochemical window were the requirements for utilization of polymer electrolytes in lithium secondary batteries.
(216) In China, great progress has been made in technology of lithium salt lake brine operation.
(217) None buffered X cut Lithium Niobate electrode structure has the smallest half wave voltage (about 70% of Z cut devices).
(218) Lithium can restrain mania, keep you calm and avoid cardiovascular disease, kidney stone and rheumatism.
(219) The Argonne patents that GM has licensed cover a cathode material that consists of lithium, nickel, manganese, and cobalt.
(220) However, the capacity of spinel manganic acid lithium fades rapidly in the charge - discharge cycle process.
(221) If you have previously been flying with NiCad or NiMH batteries, switching over to lithium polymer will result in a different number of cells being used.
(222) The change of structure and performance before and after adding the extreme-pressure and anti-wear agents into complex lithium and calcium base grease was studied.
(223) These medications include anabolic steroids, lithium, anti-tuberculosis drugs rifampin and isoniazid, anti-epileptic drugs and medications that contain iodine .
(224) It is a common knowledge that the anode material accounts for over 40% of the total cost of lithium battery and lithium manganate is the most promising anode material.
(225) The lithium chloride dew-point hygrometer has many advantages over other types of hygrometer.
(226) Various types of solid-polymer electrolytes such as those formed by adulterating lithium salts with polyphosphazenes, were extensively studied during the last tow decades.
(227) Recent studies on anode materials for lithium ion secondary battery are reviewed.
(228) Based on the calculation results of these parameters, we can choose electrolyte functional composition of lithium ion battery.
(229) This paper describes a new hygrometer which is based on the principle of lithium chloride dew-point hygrometer but it can read and control the relative humidity directly.
(230) Through evaporating experiment in salt field, the high quality of sylvite, mixed substance of boron, potassium, lithium and iodine were produced.
(231) But the researchers were able to pull all these tricks off at once using a lithium niobate crystal doped with rare earth ions and chilled to -454 degrees.
(232) Most importantly, lithium polymer is more stable than lithium ion and is non-flammable .
(233) High strength PVC casing, high-quality and high-efficiency lithium manganate battery; power control board is made of aluminum-based copper-clad plate with good heat dispersion.
(234) These electric buses are the first in Beijing to use an advanced lithium ion electric battery, which enjoy a higher energy density, comparatively smaller cubage and longer span for repetitive use.
(235) Negative active material for lithium secondary battery, method for preparing the same, negative electrode comprising the same, and lithium secondary battery comprising same.
(236) The principle, manufacture and application of periodically poled lithium niobate(PPLN) are introduced in detail.
(237) Lithium cobalt oxide is the active cathode material althoughand lithium nickel oxide are being used.
(238) Another difference is that because a lithium battery is a back-up method, function parameters can be set using front-panel keys, with no power supply necessary.
(239) The high-purity lithium carbonate for special optical glass was synthesized by using double carbonization process.
(240) Praseodymium and neodymium could be deposited at lithium or quaternary ammonium amalgam electrode, but not at sodium amalgam electrode.