lithium造句
(181) Analyses the source of non- condensable gas and its bad impact on Lithium Bromide absorption chillers. Presents the management methods of air tightness and vacuum degree.
(182) The present study will focus on the preparation of a series of one-dimensional nanostructured titanium oxide and the electrochemical investigation of lithium intercalation properties.
(183) A new method is given for separating K, Rb, Cs from mother liquor after extracting lithium from lepidolite. The authors study the best separating conditions.
(184) This kind of material can be used as negative electrode material of diversified lithium ion battery widely, and as electrode material of capacitor.
(185) The DC bias shift caused by the pyroelectric effect of Lithium Niobate crystals is analyzed. Moreover, a physical model is proposed to estimate the DC bias shift.
(186) Lithium carbonate, G CSF and glucocorticoids were very effective in agranulocytosis induced by ATD.
(187) Besides, researches and designs of the electrode and the battery were proposed for the high discharge current lithium ion battery.
(188) The high negative potential of lithium does make corresponding demands on the reduction stability of the electrolyte.
(189) Lithium is already licensed for treating manic Depression and other mental disorders, and is extremely cheap, costing just 48p for a packet of 20 pills.
(190) Lithium - ion - battery fires have forced some high - profile recalls of laptops.
(191) Virtually every battery maker developing lithium ion for automotive applications is creating larger format cells that have what is referred to as a prismatic (flat rectangular) shape.
(192) The conception of experiments is resolving the irreversible phenomena in the DPG lithium secondary battery.
(193) A brief and practical formula was put forward, which can be used to calculate the theoretical capacity of the doped lithium manganese oxide and can indicate which kind of doped ions should be chosen.
(194) Pitts says this compares favorably with lithium cobalt oxide high - energyhigh - power ba chemistry currently on the market.
(195) Lithium-calcium base grease, prepared by adding calcium soap into lithium base grease, can retain the multifunction of lithium base grease, reduce tie oast and improve the water resistance property.
(196) Do not have mercuric alkaline manganese 2 times batteries, nickel hydrogen batteries, lithium battery.
(197) Mr. Lu: including magnesium salt, sylvite, lithium salt, etc. and only chloride was edible.
(198) Pharmaceutical and Photographic Grade Potassium Bromide, Ammonium Bromide, Hydrobromic Acid, Lithium Bromide as well as organic bromine flame retardants including Tetrabromobisphenol A and so on.
(199) Carbothermic reduction of zinc sulfide in the presence of lithium carbonate and calcium oxide analysis ( TGA ).
(200) Lithium metal is the most promising anode material because of its most negative normal electrode potential and the highest specific energy.
(201) When the temperature of heat source is relatively low, the falling film generator in the lithium bromide absorption machine can improve its heat and mass transfer performance.
(202) The results showed that in the case of lithium ionomer, addition of zinc stearate lowered obviously the melt viscosity, and enhanced tensile strength of the ionomer.
(203) Application: For lithium tantalate single crystal and additive in special optical glass.
(204) One of Corvus’s NMC modules costs about $9, 300. A comparable lithium iron phosphate system would set you back around $7, 500.
(205) The Deposition mechanism of Lithium on aluminium electrode was studied by using linear sweep voltammetry and potential step method.
(206) One-pot synthesis method of diarylmethylamines was investigated using aryl lithium salt, thioformamide and aryl Grignard reagent.
(207) The outer layer of the lithium ion battery pole roll is wrapped by a metallic foil used for preventing the outer and the side surface of the pole piece and stuck with a label.
(208) Cosmetics, drugs such as lithium, and genetics also contribute to an individual's zit potential.
(209) The positive electrodes are often made from lithium iron phosphate. Corvus, however, uses lithium nickel manganese cobalt (NMC) because it provides a greater energy density.
(210) In accordance with the conventional production process, the loss of lithium is often about 7% , when Al-Li alloy is melted in graphite crucible.
123456789