kinematics造句
(1) The statics, dynamics and kinematics simulations to multi - work situations of the hydraulic support are investigated.
(2) The multi-body kinematics model of air suspension-steering system for some kind of great passenger cars was established using Virtual Prototyping Technique in the software ADAMS.
(3) Based on steering kinematics theory, parameters analysis and optimal design are made on four-bar steering mechanism of a mining truck applying ADAMS software.
(4) Secondly, the kinematics calculation algorithm is designed by matrix calculation module.
(5) Kinematics model of a point on driven lever of spatial CCS mechanism was established mathematically by vector algebra and matrix operations.
(6) Its kinematics and kinetics law differs from those of the general moving beam typed suction pump.
(7) Secondly , kinematics and statics of the planetary intermittent mechanism are studied.
(8) By setting up kinematics model of mining vehicle on uneven terrain and measuring dynamic parameter by compass, we can use the model for dead reckoning and get correct orientation of mining vehicle.
(9) The method's research of kinematics kinetic and dynamic educational analysis in virtual prototyping of monotype sugarcane harvester is brought forward.
(10) An optimization approach for minimizing the kinematics error magnification from the linkage variation to the end-effector position is studied based on the graphical design method.
(11) Presents the mechanical design and kinematics analysis of a dextrous robot hand to develop multifunctional upper limb prosthesis .
(12) Moreover, the kinematics model was built by homogeneous coordinates while kinetics model of single-supporting was built by Lagrange function.
(13) The kinematics of free electrons is described by the free Dirac equation, a four-dimensional system of partial differential equations.
(14) Based on the kinematics analysis of lunar rover, we build the whole vehicle model.
(15) Fourthly, virtual prototype is established, while kinematics simulation is implemented using ADAMS software.
(16) Kinematics and dynamics of mechanical systems including rigid bodies in plane motion.
(17) The method of elastic resonance scattering in inverse kinematics, which was progressed in recent years, is briefly introduced.
(18) Optimum results showed that the kinematics precision of steering mechanism is assured even if there are clearances in locomotion joints.
(19) Then, the calculation methods adapted from hydrokinetics and kinematics principle are applied on setting up mathematical models of the Valve-Cylinder system, the piston pace and displacement.
(20) The paper explains a term-stride length of middle-distance run from two aspects, one is the basic factors infect on speed, the other is kinematics parameter of support period.
(21) Based on differential calculus of parameters'the method of the establishing traffic kinematics model is proposed.
(22) The mathematical model is formulated by the way of vector and coordinate transformation in the linkage mechanism so as to derive kinematics modeling of irrotational displacement isolator.
(23) The system of autosavings ( checkpoints ) as well as interactive kinematics were reinstated.
(24) We take the geometry method to derive the inverse kinematics and the center of pressure (COP) of the biped robot.
(25) In the development of automobile air conditioning compressor, the key parts' kinematics and dynamics characters and the imbalance quantity of 7F15 swash plate compressor was simulated and studied.
(26) To abstract vehicle driving characters, velocity time record is regarded as muster of kinematics sequences.
(27) The paving process of asphalt paver and the action between mixture and screed are analyzed in order to solve the problems in kinematics model of screeding unit.
(28) The analytical method used is proved effective for the modelling and program analysis of the kinematics of joint transmmition in multibody mechanical systems.
(29) Angular displacement relationship function is derived using vector method. Also, kinematics parameter restraint conditions and computer drawing typical movement curve are given.
(30) The results provide reference conclusion for the design of parallel kinematics equipments.
1234