weld造句
151. By comparing analysis results, the best moulding project is chosen filling effect being unifor with unobvious weld line and centralizing air traps.
152. A computer control system for research is designed in this paper considering the weld penetration control on mild steel in TIG welding with electro eddy sensor.
153. Applied this algorithm, it got the matching curve of weld pool successfully. Compared with original image, the booboo is very small, and the quality is fantastic.
154. Weld residual stress degree of irregularity is the important influencing factor for equipment life.
155. In the continuous path case, they might be used to track the desired weld path ahead of the welding torch.
156. WDL is a certain steel which has lower sensitivity to weld cold crack and need not or a little warm-up before weld.
157. X-ray real time imaging for weld inspection using the X-ray industrial television detecting system, then, is a promising d...
158. By combining SW(stripping welding) tips with capacitor spot welding machine, an equipment to directly weld enamelled wires was designed.
159. If the valve body material can be welded, but very different thermal expansion coefficient, or changes in operating temperature range of a larger thread junction closure weld must be honey.
160. The microstructure of the weld zone is tempered martensite zone.
161. Basic flux-cored wire for backing weld to T91 tube was studied in this paper.
162. It was systematically studied that Na2 SiF6 and fluorite influence on the welding arc stability, welding spattering, slag detachability and the appearance of weld beads and the size of droplet.
163. This paper introduces a new auto - body spot weld quality monitoring system using electrode displacement.
164. All cracks were detected in regions where such manually made weld passes existed.
165. Drop transfer in the process of MIG welding is very complicated and quality of weld line is easily impacted by welding parameters coupled with each other.
166. The results show that after TIG arc remelting treatment, the T-joint weld toe area can improve the shape of the weld toe, however, the area till shows a tensile residual stress state.
167. The corrosion resistances of fusion zone and weld decay zone have all decreased after GTAW and LBW process.
168. Through the analyze to the structure of main components' weld of linked - together lamp bulb unit and relating materials, the cold crack should be taken into great consideration in welding.
169. The experiments show that with the new programming strategy the reject rate is reduced from 20% to 5% and the weld quality is remarkably improved.
170. Temperature and residual stress field of industrial pipe butt weld was simulated by ABAQUS codes.
171. Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.
172. Weld cannot have empty solder, leakage solder, solder to wear, head of welding wire of stomatic , remain, burr, need polish fruity: Ying Guangjie of tube wall surface is flowing, feel is fluent.
173. The internal stress is consisting of circumferential stress and axial stress, from which the compound stress of the weld seam is derived.
174. The method of Carbon arc-welding is adopted. It is feasible in practice to be used in the material weld. The feedback from the user demonstrates the reliability of welding quality.
175. The basic requirement of welding the steel 2205 is that the weld metal and heat-affected zone obtain a favorable phase balance and retain the performance as the base metal after welding.
176. Cut the gusset off from the ODS drawworks skid, and weld back on square, production and QC issue.
177. Two passes ASAW technology for girth weld of LPG cylinder with lock butt joint is introduced.
178. The microstructure and fine structure of weld fusion zone for high strength fine grain steel were studied.
179. By comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.
180. The classification and characteristics of weld line of injection-molded parts are introduced.
12345678910