allowable造句61) The retrofit kit uses a series of control parameters to determine the maximum allowable G-force loading and safe operating limits.
62) Allowable deviations of actual resulting linear density from nominal resulting linear density.
63) The results show that an allowable supersaturation without the precipitation of calcite scaling existed.
64) What is the allowable Ripple current Murata's ceramic capacitors can withstand?
65) This work stirred up another ground for controversy about the allowable solutions.
66) There will be a certain thermal stress in the lining during operation, but the stress is not great, being only about one tenth of the allowable tensile stress of the reinforcing bars.
67) The importance of allocation allowable emission fairly and reasonably for each polluter in total emission control planning is analyzed, The defects in the existing allocation methods are pointed out.
68) Most of other workshops showed air dust particles beyond the allowable limit.
69) It is also found that there exists a maximum isolation period, at which, the limit ratio is zero or the horizontal displacement of the rubber bearing exceeds the allowable value.
70) Now, if you run the form, you'll still see the alert box, but only once, because the new value is allowable according to the schema.
71) Is there a documented allowable rework procedure with appropriate quality checks?
72) But I'd like to see the tax deduction for installment loans on automobiles come back as an allowable deduction.
73) Virtual population analysis (VPA) is one of the classic models in fish stock assessment, and is one of the main models in calculating the total allowable catch (TAC).
74) Last October, for example, they established limits for allowable trace amounts of melamine in dairy products, and tightened quality-control regulations for the dairy industry.
75) In Line number, type a number within the allowable range and click OK.
76) Maximum length of field pipeline span is related to the factors such as the strength of pipes and joint adapters, and the allowable pack angle, etc.
77) Because today's ceremony is being webcast, the lighting level had to be adjusted beyond that is allowable for viewing of the originals.
78) An array subscript is not valid because it falls outside the allowable range.
79) Type - safe code is code that accesses types only in well - defined, allowable ways.
80) Respectively using magnesium oxide and bone ash cupels, the result deviation of gold content in the samples is within the allowable deviation of the national standards.
81) This work studies the maximum equivalent stress on the component and the allowable amount of interference for an interference fit based on the maximum distortion energy theory.
82) Through the detection of the stator current, the control can confine the starting current within the allowable range.
83) M. Foxbepx and discusses its allowable value from the view of ensuring work efficency of cranes' drivers.
84) It's worth pointing out that the class of allowable optimizations is different depending on whether the compiler is generating verifiable code (/clr:safe) or unverifiable code (/clr or /clr:pure).
85) The contributory value of the cargo shall be computed on the basis of the c. i. f. value, less the amount of loss or damage not allowable in general average and the freight at the risk of the carrier.
86) Increasing arresting force and improving low-speed aero characteristics can increase allowable maximal landing mass with an enlarged envelope area, but changing glide slope angle makes little effect.
87) By the method, robust reliability measure of robust stability degree of interval delay-independent control systems and the maximum allowable ranges of the basic parameters can be given.
88) The maximum velocity of tracked vehicle can be improved with the increase of allowable suspension travel and heat sinking capacity of the shock absorber.
89) The method of seeking the maximum throughput allowable subjected to the operational condition is proposed.
90) The allowable stress levels to which the actual stress levels are compared are based on empirical findings for the material involved.