allowable造句
91) Overvoltage protection level and maximum allowable energy dissipation of MOV are ascertained.
92) The thickness of film formed by said method can exceed the allowable range of critical thickness of the film uniformly grown on the heterosubstrate.
93) The allowable deduction is apportioned between the estate and the beneficiaries.
94) Reasonable date and equations for allowable shearing stress are proposed.
95) Based on water function zoning of the area, allowable permitted assimilative capacity of water bodies is computed and appraised in order to plan total permitted pollution discharge capacity in 2010.
96) The allowable bending radius is not less 6 times( unscreened ) or 8 times(screened) of outside diameter of the cables.
97) Foramls for calculating standard values of allowable concentrated leads in railway of hanging lifting equipment is introduced by using reversed calculation and their application.
98) This paper introduce the mathematical model to realize the electronic analog computation to missile allowable launching distance and explain the transforming way of radar range scale.
99) Selection basis and method on allowable contact stress of rolling ball-socket nozzle were described. Based on empirical formula and test data,[http:///allowable.html] several factors affecting allowable stress were analyzed.
100) Some datum, for example safety factor and allowable stress are put forward based on production practice.
101) Some one think: Will not be. Every kind of allowable occupation is equality and noble-minded which it's most honor to learn money by our sweat, Nothing to mind and never be self-contemptuous.
102) Firstly, the error source of baud rate and the allowable baud rate error are analyzed with the example of MCS-51. Then a method of baud rate autoregulation is presented.
103) The maximum density is governed by the allowable limit of fluidity for hydraulic transport.
104) This thesis assesses the possible maximum allowable capacity of distributed generation (DG) interconnected to a normally closed loop feeder.
105) Therefore, a new strategy is proposed in this thesis to determine the maximum allowable capacity of DG interconnected to a normally closed loop feeder.
106) In order to support reactive load, too much reactive power flows in the network so that the loss of active power increases greatly and the voltage of load bus waves even overruns the allowable range.
107) The standard rating cycle for the lift generation system needs to generate at approximately 25% above maximum allowable loaded take off weights.
108) The result showed the experiment error was allowable to laboratory apparatus and proved Bernoulli equation.
109) What's the max allowable vibration value of the turbine at rated speed?
110) Not more than one secret room or passage is allowable.
111) With the allowable maximum ground settlement as target value, a dynamic optimization model is designed to draw up the strategy(technical measures) controlling the effect of tunnelling on environment.
112) The maximum allowable misalignment of the coupling is 0.02 mm.
113) As underwater depth increases, metacenter height increases, but water entry angle decreases, so the platforms allowable swing angles also decrease.
114) The relationship between system MCU (Microprocessor Control Unit) operating speed and interruption codes is analyzed, and the longest executive time allowable for an interrupt routine is calculated.
115) Adoption of higher voltage class makes more rigor request for allowable value of switching overvoltage of the transmission lines.
116) The paper presents how to determine the allowable fatigue crack dimension according to BS7910 specifications and C iterative program, it lays the foundation for safety checking and evaluating.
117) According to mutual agreement, any delivery length and package form is allowable.
118) The condensation point is not the only basis for determining the allowable oil temperature at the inlet of heating station.
119) Therefore, the voltage distortion of each harmonic frequency can be definitely maintained below an allowable level and the loadings along the feeder can receive uniform and quality waveform.
120) When the heat dissipation is considered, the local temperature can still exceed the allowable value for the service of steel bolt.
12345