indium造句31) It describes the designs of one kind of indium metallurgy and the progresses in production. After these process improvement, designing target level have reached.
32) The commercial test for enrichment indium in B # tower bottom led by electrolysis was proceeded.
33) ITO powders having a very low Chlorine content were prepared by a novel sequential wash and subsequent post - calcination method using Indium Chloride as staring material.
34) Some elementary anomalies of indium and other elements have been found at the bottom of the stratum, it can be used as the evidence to separate geological era.
35) Methods Eupatorium asprella, adina rubella and chrysanthemum indium in compound eupatorium syrup were identified by TLC.
36) The indium sesquioxide with over 99% purity can be prepared by a decomposition of nitric acid.
37) PPY films were prepared by electro - chemical method onto the indium - tin oxide glass ( ITO ).
38) In this paper, the practice of producing nanometer zincite and concentrating indium from the dust of smelting lead was introduced in detail.
39) Computer simulations on the so called indium gallium mystery show a new way for increasing the efficiency of CIGS thin-film solar cells.
40) Especially, the battery with electrolyte saturated by zinc oxide and indium oxide shows excellent charging-discharging performance and charge retention capacity as well as its cycle life.
41) Indium, boron and gallium are used in making solar cells.
42) The last part in this thesis is the fabrication of the copper indium diselenide nanorods (CuInSe2NRs) which are commonly used in the solar cell technology.
43) While the indium absorbed by a muriatic acid is manufactured into the finished product of a metal indium ingot after iron-removing and replacement processing.
44) Indium sulfide nanomaterials of different frameworks and morphologies have been prepared ionothermally using indium chloride and sodium sulfide as raw materials and different ionic liquids as solvent.
45) This article presents acid could be used to wash the indium bumps before flip chip bonding, based on indium oxide dissolved in acid.
46) The optical interference layers are deposited between the glass substrate and ITO(indium tin oxide) anode, which could partly suppress the reflection of ambient light.
47) Novel technologies of separation and recovery of indium are reviewed according to the types of technologies.
48) The potential superiority of indium trihalide in organic synthesis will promote the development of "Green Chemistry".
49) Acceptor - An element, such as boron, indium, and gallium used to create a free hole in a semiconductor.
50) Chemical co-precipitation method was used to prepare indium tin hydroxide with cubic lattice.
51) Indium leaching rate was more than 90 % at optimum conditions.
52) Objective To estabish a method of AES for determianation of Indium and compounds in workplace air.
53) Scientists have also developed a promising hybrid approach to producing a silicon-based laser that relies on adding a piece of gallium arsenide or indium phosphide to the top of a silicon substrate.
54) Preparation of Indium Tin Oxide ( ITO ) Powders and High - quality ITO Target.
55) The DSC curves measured from the experiment of the standard sample indium and stannum recommended by NBS are accorded with the melting point of sample.
56) The paper presented a new method for sample treatment in semiconductor indium antimonide single crystal dislocation display, and proveded of feasibility this method with large number experiments.
57) Electrodes are made of a transparent conductor called Indium Tin Oxide ( ITO ).
58) It introduces the process of recovering Indium from Lead reverberatory dust with H2SO4 leaching-P204 extraction.
59) Iron, manganese and lead are the major minerals, accompanying silver and indium.
60) Acceptor - An element, such as boron, indium, and gallium used to create free hole in a semiconductor.