rotor造句
211. The Synergy N 9 tail rotor system is ready for hard 3 D.
212. At the end, the vibration responses are displayed in polar diagram synthetically, in which the displacement, the static offset and the deflection angle of rotor could be shown altogether.
213. The stator clamps rotor by a flexure hinge clamping structures in symmetrical directions.
214. EA mounted on the either end of rotor shaft can generate impulse excitation force or simple harmonic excitation force with different frequency.
215. The rotating parts consist of the rim, web, bearings, shaft, and rotor portion of the motor.
216. The efficiency distribution along blade span and the inlet and outlet velocity triangle measurement of rotor blades were made around the designing point.
217. The influence of tip clearance on overall performance and detailed flow structure in tip region of an axial compressor rotor was investigated.
218. Fundamental principles and control strategies of pitch-controlled wind induction generator system with rotor current controller (RCC) were presented.
219. The helicopter rotor blade deicing technique is greatly important to ensure the flight safe - ty.
220. Therefore we educe the ax- is's special vibration curve of rotor.
221. ZT 12 - 00 aquapulper is made up of plug rotor, trough, heating enclosing, temperature controller , framework, etc.
222. Comprehensive experiments have been performed to study the starting performance load ability of ALA rotor motor.
223. Usage: suitable for family use dynamotor rotor coil two poles wire winding in the same time.
224. The synchronous hysteresis motor consists of a polyphase - wound stator and a magnetically hard rotor.
225. This paper did a simulation research on the loading process of hydraulic dynamometry rotor.
226. This paper focus on diagnosing rotor winding faults in asynchronous motors by residual voltage after AC dump.
227. The diameters of the rotor and the stator are limited by mechanical stresses.
228. Usage: suitable for slot insulation coating of kinds of low voltage micro motors, auto motorcycle motor rotor.
229. Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft.
230. Hammer - shape pulverizer adopts particular hammer - shape rotor, which has excellent pulverizing, elect , adapt to carbamide, monoammonium and so on.
231. Therefore, the model development in this paper starts from a consideration of basic stator coil and the basic loop that constitutes the rotor winding.
232. The electrolytic level is therefore electrically equivalent to a potentiometer, the center electrode corresponding to the rotor arm.
12345678