abrasive造句
91. This paper analyzed the new type abrasive material characteristics, the manufacturing technology and their applications.
92. The impeller, wear plate and agitator are made of abrasive resistant 28% chrome iron (600 Brinell, 57 Rockwell C).
93. Abrasion paper Good grade of manila or other strong paper, coated with glue and an abrasive material, such as sand, emery or carborundum. Also called Emerypaper, Sandpaper.
94. Clean damaged areas by abrasive blasting or power tool cleaning, feather edges to sound and intact areas.
95. The chief of staff issued a series of orders in an arBitrary and aBrasive fashion.
96. It can be used for last chamfering in the continuous machine and. replace the abrasive wheel.
97. Crack forming is one of the main reject phenomenon for vitrified abrasive wheel.
98. The new - type of ultrafine corundum abrasive materials, prepared by sol - gel technique, have excellent grinding performance.
99. The influence of carbon in martensitic matrix (by use different austenizing temperature) on two body abrasive and impact-abrasive wear resistance of ductile iron is studied.
100. The main wearing mechanisms of the tin bronze are fatigue splitting, adhesive transference and abrasive wearing.
101. Hardness than corundum, abrasive easily broken, sharp edges and corners, good cutting, grinding heat and small.
102. The skin of the shark is very tough, sandpapery and abrasive, it could cut.
103. Abrasive flow machining (AFM) is a nontraditional finishing process that is used to deburr , polish, radius and remove recast layer by flowing a semisolid abrasive media across the workpiece surface.
104. White aluminium oxide abrasive is electrically fused in an arc furnace processed alumina as raw material.
105. Round supply of nylon abrasive polishing abrasives, including grinding wheels, wings to fly round, grinding discs, grinding wheels special relief, such as scouring pad.
106. Once sucked into an airplane’s turbines, the abrasive material can easily cause engine failure, but an aircraft’s weather radar can’t spot the ash.
107. Abrasive entities may be included in the coating for nonskid purposes.
108. The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.
109. Therefore, filtering of abrasive matter required pre-treatment stages such as pre-filtration, centrifuging, or sedimentation in order to protect the membrane.
110. Crankshaft, piston, plunger piston, guider, guide rail, rotary drum, slide block, and various abrasive wear surface.
111. LTD is located in Wuzhong Development District of Suzhou City, It is a specialized coated abrasive industrial company that collects designing, developing, producing and selling into integration.
112. It will have erosive and abrasive effects on the pipe line.
113. Cleansing method: To wipe up or extract with cloth, abrasive paper or cleanser.
114. Using FN-309 adhesive etc. as joint adhesive and, the water-resistant abrasive cloth, R/R or G/G abrasive cloth as the substrate belts the process of abrasive cloth lap jointing was studied.
115. Sawblade for cutting exotic and abrasive woods, chipboard, MDF panels up to 50 mm with a good finish. Use on table saws.
116. The slides are first cleaned ultrasonically several times in alternate baths of trichlorethylene and acetone, and are then scrubbed with a mildly abrasive detergent.
117. The artical introduces the simple method and tool for chip breaker of lathe tool lapped by cast iron abrasive wheel in lathe or milling machine.
118. Do not use detergents that contain lanolin or other oils, gasoline (petrol), chlorinated degreasing fluids (such as trichloroethylene ), organic solvents or abrasive cleaning agents.
119. The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.
120. A temperature control system of technology testing furnace for vitrified abrasive tools was designed paper.
12345678