cast iron造句151) Comparison with the chromium-plated oil ring, the niobium cast iron oil ring had lower cost, excellent wear resistance and no contamination from chromium plating.
152) It is the main material barrier for producing wire rods that the service life of cold-hardening low-alloy cast iron rollers for wire rods is very short because of serious wear.
153) Suitable for tapping threads in gray cast iron, nodular graphite cast iron, brass, brass castings, etc.
154) The influence of SG inoculant on graphitizing annealing of malleable cast iron was investigated.
155) Find FS if the plate is made of Class 25 cast iron.
156) Analyses the weldability of chilled cast iron and introduces the chemical composition and metallurgical characteristics of the two kinds of special electrodes for it.
157) Heat resisting nodular malleable cast iron is a new kind of heat resistant cast iron.
158) The submersible motor enclosure including frame, end brackets, flanges and cap assembly shall be constructed of close-grained cast iron, ASTM A-48,[www.] Class 30 or better.
159) The effects of several inoculants on high - manganese gray cast iron ? ? s microstructure and properties with 4.
160) The characters, development and process of Vermicular Graphite Cast Iron (VGCI) were discussed, and then the main reason of diesel locomotive VGCI cylinder head leakage was analyzed.
161) Probes into existed problems and development direction of high chrome cast iron mill ball in study and application.
162) As for the material for the production, QT 400 - 18 nodular graphite cast iron is preferable.
163) The dynamic characteristic, component ratio and fabricating process of resin concrete are introduced. The performance differences between resin concrete and cast iron are discussed.
164) The water treatment agent ferrate is prepared by electrolysis in diaphragm bath with double cathode chamber and porous cylinder cast iron anode.
165) In the production of low chrome cast iron grinding ball, there has been existing lower longevity and instability properties.
166) The annealing process of centrifugal ductile cast iron pipe by the heated mould method is studied.
167) The relations of microstructure and property of low-chromium white cast iron made by permanent mold with different wall thicknesses were researched.
168) Using electron microscope, the bainite morphology of spheroidal graphite cast iron after isothermal quenching was investigated.
169) Compared with the chromizing layer, the chromosiliconizing layer on cast iron is more unifomrm and more compact.
170) The results show that Nb can increase the structure stability of chilled cast iron.
171) The microstructure of spheroidal cast iron prepared by spray forming has been studied.
172) The water filter is made of cast iron, cast steel, brass and stainless steel with small figure. It is indurate and easy to install.
173) Design and characteristics of gating system for cast iron in Spain automobiles have been described.
174) Chilled cast iron camshaft has less production procedure and energy consumption and lower costs.
175) The domestic and foreign nodular graphite cast iron standard samples were analyzed with vacuum direct-reading spectrometer and were applied in the routine analysis.
176) The influence of melting rate, super heating temperature, pouring temperature and modification on high chromium cast iron were researched.
177) Main products include cast iron shots. cast steel shots, steel wire cut shots and stainless steel shots etc.
178) Medium silicon heat-resisting nodular cast iron has been chosen instead of common grey iron to make cast aluminium crucible according to the work condition. making process and cost of the crucible.
179) In this paper, the main factors affecting the chilled depth of chilled cast iron roll were discussed.
180) Heat a lightly oiled cast iron skillet or stove top griddle.