ignition造句
151. The catalytic ignition torch technology was also studied, and all of the 27 firing tests were successful.
152. A diesel engine has been converted into a spark ignition CNG engine.
153. The ignition temperatures, combustible indexes and kinetics parameters of pulverised coals have been studied with the thermogravimetry.
154. Prevent Deterioration of your Engines Performance and Maintain Fuel Efficiency with Precise Ignition Control.
155. Besides, auto - ignition occurs in the boundary layer at the lower wall in many cases.
156. The typical starting system includes the battery, the starting motor and the solenoid switch (ignition switch), and the cables which connect these components.
157. Then detailed experimental study and chemical kinetics analysis on the ignition control mechanism of ethanol are carried out.
158. The cell circuits, such as testing methods for ignition pulse and ignition angle are also expounded.
159. The study can provide helpful references for designing and optimization of the single ignition FAE batch formula and warhead.
160. ALL LUEN TAI Non - ignition foam can meet any requirement of international flammability standard.
161. Piezoelectric ceramic electron flame, ignition convenient, saves time and manpower.
162. Insert the key in the ignition lock cylinder and turn ignition switch to the On position.
163. Electronic ignition system is characteristic of excellent performance and low fault rate, the constant maintenance is not needed.
164. The validity and feasibility of the forward reasoning method for fault diagnosis based on BP neural networks are verified by the example of the faults in the ignition system of automobile engine.
165. The battery sends current to the starting motor when the driver turns the ignition switch to START.
166. The lower the density of the charge is, the shorter the ignition delay.
167. After a self adaptive ignition unit is applied, the ignition advance angle of the engine is automatically changed according to different fuels.
168. Most of these large boiler burners arranges into a hedge form and adopts the oilless ignition mode for startup.
169. The effects of temperature and equivalence ratio of supersonic premixed combustible flow on the structure of supersonic combustion flow field, ignition and flame propagation were studied.
170. USING A VOLTMETER MEASURE THE FUSED IGNITION SWITCH OUTPUT CKT ( CAV 3 ).
171. Entire flameout, the automatic flame patented technology ( gas - saving is thorough, ignition to be more convenient ).
172. Through the calculation of thermal stress values, it has been affirmed that free oscillation laser ignition of the explosive is heat...
173. Combustion parameters such as ignition temperature, peak temperature of maximum weight loss rate, burnout temperature, maximum rate of combustion, and combustibility index were analyzed.
174. Droplet ignition and extinction in practical combustors are strongly influenced by forced convection and turbulence.
175. The analysis of combustion parameters in cylinder shows that the ignition delay reduces, peak combustion pressure decreased and combustion process becomes more smooth.
176. This paper reports an experimental study on burning diesel oil-methanol-water compositeemulsified fuel in a direct injection compression ignition engine.
177. This system can make automatic ignition, automatic interlock, automatic regulate work load, meanwhile it can control the product's quality.
178. Firstly, the combustion of a spark ignition engine is simulated, by using a - dimensional turbulent entrainment model.
179. A mathematical model was set up to calculate the minimum ignition energy based on thorough analysis of combustion mechanism of the engine combustible mixture.
180. Lightweight magnesium valve covers, ignition cover, and sound deadening plastic outer clutch cover.
12345678910