pinion造句
31) Two typical rack - and - pinion steering linkage . e the optical design of leading and are considered. theare also.
32) The trunnion sprocket has come off the pinion, but do not worry - we'll soon but that right.
33) The translator can be a rack and pinion setup or can be a thread arrangement.
34) The motor needs to be move further apart from the gearwheel as a bigger pinion with higher number of teeth has to be used.
35) The drive pinion is meshed with a large ring gear ring gear revolves with the pinion.
36) The gearing machine tool of the model Y3150E is modified and a new milling head is designed to cut the envelope tooth of the pinion using allelomorph method.
37) The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.
38) A technic for the life prolongation of special profile pinion cutter, its correlative model and practical examples are introduced and described in detail in this paper.
39) Rack and pinion with spring manipulator designed to solve the complexity of hand, simple, reliable clamping to complete processing.
40) A mathematical model is developed for the design synthesis rack - and - pinion steering linkage.
41) Our company is one of the earliest manufacturing works which research, develop and produce rack and pinion pneumatic actuator in China.
42) The Hytork range of quarter turn actuators are piston operated. The linear movement is translated to quarter turn through a simple central modular rack and pinion, designed for long life.
43) There are two applied forces acting on floating plate, one from the outlet port formed by the pinion, inner gear and filling piece, the other from the back-pressure cavity of floating plate.
44) DC or stepper motor drive, with rack and pinion, ballscrew or belt transmission.
45) The device can be powered electrical, pneumatic, manual, pinion rotating devices.
46) Adopting object - oriented design methods, a rack and pinion steering gear was modeled based on ANSYS software.
47) The wings of the ostrich flap joyously: Are they the pinion and plumage of lovingkindness?
48) The results from calculating show that the precision of the replaced tooth is quite good, while it is much easier for the manufacture of the pinion cutter.
49) A carbide pinion cutter is designed due to the new configuring theory.
50) Rotate the pinion gear several complete revolutions to align the bearing rollers.
51) The present invention provides a cervical collar with a rack and pinion adjustment mechanism.
52) The rack - and - pinion steering is sharp, and the torsion beam rear axle gives car a grown - up feel.
53) It's a rack and pinion, and a good one at that.
54) In the view of the relative movement between grinding wheel and the new configured pinion cutter, this paper deduced the coordinate equation of convex curved face.
55) The round circle and pinion that have gone through heat treatment can meet operation requirement.
56) Rack and pinion variable van synchronizing mechanism for inner diameter vane shroud.
57) The flywheel also has a large ring gear at its outer edge , which engages with a pinion gear on the starter motor during engine cranking .
58) The rack and pinion power steering gear of rotary valve has been widely the car.
59) Also,[http:///pinion.html] to accelerate the pitting process the face width of the pinion employed was half that of the wheel.
60) The formula of calculating the volume of pinion cutter was derived. Taking the volume and life as objective function, the optimum design of designing parameters of pinion cutter was explored.
123