pinion造句
61) The LR series rotary actuator is a low profile rack and pinion design.
62) Some automobile steering mechanisms have rack - and - pinion drives that use this principle.
63) This paper introduces a optimization method of pinion cutter for cutting helical gears.
64) Unique twin guide bar feature absorbs rack and pinion load and ensures optimum teeth engagement.
65) The RPG series has true parallel motion that is generated by a double acting piston attached to the pinion mechanism with a linkage that is guided in the body for precise centering. more...
66) In this paper,[http://] the meshing theory of rack and pinion steering gear with variable ratio is studied systematically.
67) The test results show that the average life of gear can increase40%approximately by taking peen shot for rear axle pinion gear.
68) Using a helical involute pinion surface to form the grinding worm surface, a helical face gear is formed via a two-parameter worm envelope.
69) According to the actual structure of a electric automobile rack and pinion steering system, kinematic equation of the steering mechanism is deduced.
70) The the force location and helix angle the bend stresses of pinion and face - gear is discussed.
71) The average radius of curvature of the contact area on the pinion root may be used as the calculation basis.
72) Vendor Shirley Pinion displays her wares in Dade County, Ga.
73) He is held with his arms pinion together behind his back.
74) Drive pinion to stop collar clearance shall be controlled to OEM specifications.
75) Spinner mainly consisted by cabinet, wedge-shaped sheath, friction wheel, air tube clutch , gear wheel 1, gear wheel 2, gear shaft , motor pinion, air motor and other parts.
76) X to exercise dual-motor dual rack and pinion drive technology, eliminating the pros and cons to the meshing clearance.
77) The involute pinion cutter grinding experiment made in the laboratory and the measuring results prove that the former calculate result is valid .
78) Hold the yoke with Wrench 67 Remove the pinion shaft nut and washer.
79) Adopted ball bearing movement device, high precision guide liner, rack and pinion and servo motor, insure the stable movement with high precision position and operation.
80) The shim chosen by the measuring machine can achieve the pinion and ring gear's meshing spot request.
81) Hydraulic rack and pinion steering device with help of on - demand power steering pump.
82) The utility model can drive a wire rope through the combination of a swinging mounting, a stationary wire spool, a gearwheel disk, a fixed tray, a pinion, a motor, etc. to attain automatic elevating.
83) Check that the pinion gear does not return inward after the cable of terminal C is disconnected.
84) The PG Series is low profile with true parallel motion that is generated by a pinion mechanism powered by a double acting piston.
85) The two differential - pinion gears mesh with these two side gears.
86) Steering is provided by a vehicle - speed - sensitive power - assisted rack - and - pinion design.
87) As one of the individual variable vanes is rotated by an actuation source, the other variable vanes of the variable vane array are rotated a like amount by the rack and pinion gear interface.
88) Within the gear carrier unit, taper roller bearings are employed almost universally for carrying the input pinion.
89) If an oil slinger is used behind the inner pinion bearing cone, deduct the thickness of the slinger from the dial indicator reading and use that total for shim selection.
123