disconnect造句
31. Disconnect stabilizer bar links at the axle.
32. Disconnect the track bar from the frame rail bracket.
33. Disconnect breathing tube from any attached headgear.
34. If there is a clear disconnect, the value of that inbound link is significantly diminished, if not completely disregarded.
35. USB drivers register two entry points, probe and disconnect, with usbcore, along with their class/subclass/protocol information (see struct usb_driver in include/linux/usb.h).
36. You should disconnect the wireless set before you make adjustments inside it.
37. RELEASE THE PARK BRAKE, DISCONNECT THE BRAKE FLUID LEVEL SWITCH CONNECTOR.
38. Disconnect the gauge glasses or fit a blind flange between them.
39. When heritage and its interpretation is allowed to ossify the past and the present begin to disconnect.
40. Should a power outage occur (UPS in stand-alone mode), do not disconnect the power cord from the mains, as this will break the earth connection to bonded appliances.
41. Three - phase power supply box protection by fuse - controlled disconnect switch; Fuse - controlled command circuit protection.
42. We can therefore disconnect this bond ( 5 a ).
43. Disconnect 40A non-fusible switch. Voltage 600 VAC. Interrupting rating 10,000 A.
44. Disconnect the power line before changing accessories and when not in use.
45. Disconnect the secondary spark plug cable from the ignition coil.
46. Disconnect both ends of the circuit or component to be measured.
47. Quiesce Database - You can explicitly disconnect all applications or you can use this new quiesce database feature.
48. GAIN ACCESS TO THE BCM BODY 20 - WAY CONNECTOR BUT DO NOT DISCONNECT.
49. DO NOT DISCONNECT THE SPARK PLUG WIRES WHILE THE ENGINE IS OPERATING.
50. Sometimes a pole mounted disconnect will be the transition point.
51. Depending on the one he got it might also have a T2 disconnect in there which physically severs the power from the the devices.
52. Disconnect and isolate the battery negative cablUnplug the 2 - way heated seat back wire harness connector.
53. Close test cock No.4. Disconnect bypass hose ( yellow ) at test cock No.4.
54. An illuminated master power disconnect circuit breaker with manual reset and individual power LED indicators protects the design.
55. Slots can disconnect at any point in time, including while those same slots are being invoked.
56. Thermal relay value should be able to in no more than 140% of the rated current compressor when disconnect.
57. Disconnect power cord for another 10 secs and then reconnect.
58. Disconnect the router from UTP cables ( not the power cable ).
59. The Remove button is used to disconnect all attached base station sites from the MSC.
60. A fuse holder shall disconnect all ungrounded conductors of the supply circuIt'simultaneously during fuse replacement.
1234